Creality Hyper PLA-CF

High strength and good layer adhesion

Highlights:

• High strength and good layer adhesion

• Matte finish

• Minimal layer texture

• Print speed up to 300 mm/s

Perfect balance between strength, adhesion and speed

Creality PLA-CF has 30% higher mechanical properties than regular PLA , including greater flexural strength, flexural modulus, and impact strength.

Makes it easy to design and print complex structures

Hyper PLA-CF has low shrinkage and high resistance to warping , ensuring perfect fit and precise accuracy between printed parts .

High-speed printing without clogging

Creality PLA-CF is just as easy to print with as standard PLA and delivers a stable, smooth and consistent printing experience , even at high speeds – with no risk of clogging .

Minimal effort when removing support

PLA-CF is designed to be partially self-supporting , which makes support removal significantly easier than with regular PLA , while maintaining a smooth and neat support surface .

Print structural parts for more demanding and complex working conditions , such as drones (UAVs), aircraft models, joints, joints, drive mechanisms, gears and moving components , etc.

Wide compatibility

Works with most FDM/FFF printers. Due to the abrasive fiber content, a hardened nozzle is recommended for extended use.

Printing tips

To achieve the best print quality, it is recommended to dry the filament before printing.
Recommended drying conditions: 55℃ for 8 hours in a filament drying box, or 75℃ for 12 hours on the printer's heatbed.

Hyper PLA Carbon Fiber Filament

Filament diameter: 1.75 mm ± 0.03
Recommended printing temperature: 190–230℃
Recommended heatbed temperature: 45 ℃
Recommended print speed: 50–300 mm/s