{"product_id":"prusa-core-one-l-print-sheet","title":"Prusa Core ONE L Print Sheet","description":"\u003ch1\u003ePrusa Core ONE L Print Sheet\u003c\/h1\u003e\n\u003cp\u003eDifferent print sheets for Prusa Core One L.\u003c\/p\u003e\n\u003ch1 class=\"Heading-sc-bb4ac814-0 gusCFV\"\u003eTextured Powder-coated\u003c\/h1\u003e\n\u003cp data-start=\"49\" data-end=\"64\"\u003e\u003cstrong data-start=\"49\" data-end=\"62\"\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"66\" data-end=\"648\"\u003ePowder coating applied directly to the metal makes this build plate very resistant to damage. Should a heated nozzle hit it, the metal can conduct the heat away. The powder coating also gives the surface a distinctive textured appearance, which will be visible on your prints. The textured surface hides most of the mechanical damage that can occur from tools. Only the top of the small bumps can be scratched, which will not leave marks on the bottom of the model. This surface is used on our print farm – look at the parts you have already printed for reference.\u003c\/p\u003e\n\u003cp data-start=\"650\" data-end=\"723\"\u003eMore details about the spring steel sheets can be found in our knowledge base.\u003c\/p\u003e\n\u003cp data-start=\"725\" data-end=\"740\"\u003e\u003cstrong data-start=\"725\" data-end=\"738\"\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"742\" data-end=\"994\"\u003eNever clean the textured PEI powder-coated spring steel sheet with acetone! This will create micro-fractures in the PEI surface, causing the surface to degrade over time. Read more about printing on the textured PEI powder-coated steel sheet on our blog.\u003c\/p\u003e\n\u003cp data-start=\"996\" data-end=\"1009\"\u003e\u003cstrong data-start=\"996\" data-end=\"1007\"\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1011\" data-end=\"1406\"\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.), are not covered by warranty, as the coatings are designed to wear over time, unless the failure is due to a material defect or manufacturing defect. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage, is also not covered by warranty. Only defective sheets upon delivery are covered by warranty.\u003c\/p\u003e\n\u003ch2 data-section-id=\"1uesl8g\" data-start=\"882\" data-end=\"895\"\u003eFEATURES\u003c\/h2\u003e\n\u003cp data-start=\"1011\" data-end=\"1406\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Screenshot_2026-03-10_at_17-11-14_CORE_One_L_Textured_Powder-coated_Print_Sheet_Original_Prusa_3D_printers_directly_from_Josef_Prusa.png?v=1773159069\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch1 class=\"Heading-sc-bb4ac814-0 gusCFV\"\u003eSmooth PEI\u003c\/h1\u003e\n\u003cp data-start=\"49\" data-end=\"64\"\u003e\u003cstrong data-start=\"49\" data-end=\"62\"\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"66\" data-end=\"503\"\u003eYou might leave small marks on the print surface with your nozzle or tools; these will typically be shinier than the rest of the surface. However, this does not affect functionality or adhesion. If you want the entire print sheet surface to look uniform, you can re-condition it. The easiest method is to take the abrasive side of a dry dish sponge and gently wipe the affected area with circular motions a few times.\u003c\/p\u003e\n\u003cp data-start=\"505\" data-end=\"578\"\u003eMore details about the spring steel sheets can be found in our knowledge base.\u003c\/p\u003e\n\u003cp data-start=\"580\" data-end=\"593\"\u003e\u003cstrong data-start=\"580\" data-end=\"591\"\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"595\" data-end=\"990\"\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.), are not covered by warranty, as the coatings are designed to wear over time, unless the failure is due to a material defect or manufacturing defect. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage, is also not covered by warranty. Only defective sheets upon delivery are covered by warranty.\u003c\/p\u003e\n\u003cp data-start=\"992\" data-end=\"1262\"\u003eSmall dots may appear on the surface of the \u003cstrong data-start=\"1035\" data-end=\"1059\"\u003ePEI-Ultem steel sheet\u003c\/strong\u003e. These can slightly affect the appearance of the bottom surface of the print, but they do not in any way affect the printing process itself or the reliability of the print. We do not consider these dots a basis for a claim.\u003c\/p\u003e\n\u003ch2 data-section-id=\"1uesl8g\" data-start=\"882\" data-end=\"895\"\u003eFEATURES\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Screenshot_2026-03-10_at_17-14-19_Core_ONE_L_Smooth_PEI_Print_Sheet_Original_Prusa_3D_printers_directly_from_Josef_Prusa.png?v=1773159232\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch1 class=\"Heading-sc-bb4ac814-0 gusCFV\"\u003eSatin Powder-coated\u003c\/h1\u003e\n\u003cp data-start=\"49\" data-end=\"64\"\u003e\u003cstrong data-start=\"49\" data-end=\"62\"\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"66\" data-end=\"601\"\u003eThe \u003cstrong data-start=\"66\" data-end=\"82\"\u003eSatin sheet\u003c\/strong\u003e further expands our range of print sheets. In terms of print properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with a slightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less common filaments, such as ABS, ASA, FlexFill 98A, polycarbonate, and more. Most materials can be printed without a separate release layer (e.g., glue).\u003c\/p\u003e\n\u003cp data-start=\"603\" data-end=\"795\"\u003e\u003cstrong data-start=\"603\" data-end=\"620\"\u003ePolycarbonate:\u003c\/strong\u003e Prints better on the Satin sheet compared to smooth and textured sheets. However, for frequent printing with PC, a layer of glue stick is recommended to prevent possible damage to the sheet.\u003c\/p\u003e\n\u003cp data-start=\"797\" data-end=\"870\"\u003eMore details about the spring steel sheets can be found in our knowledge base.\u003c\/p\u003e\n\u003cp data-start=\"872\" data-end=\"887\"\u003e\u003cstrong data-start=\"872\" data-end=\"885\"\u003eWARNING:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"889\" data-end=\"1107\"\u003eNever clean the Satin powder-coated spring steel sheet with acetone! This will create micro-fractures in the surface and cause it to degrade over time. Read more about printing on Satin powder-coated steel sheets in our knowledge base.\u003c\/p\u003e\n\u003cp data-start=\"1109\" data-end=\"1122\"\u003e\u003cstrong data-start=\"1109\" data-end=\"1120\"\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"1124\" data-end=\"1519\"\u003eConsumable parts, such as PEI sheets (smooth, textured, etc.), are not covered by warranty, as the coatings are designed to wear over time, unless the failure is due to a material defect or manufacturing defect. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage, is also not covered by warranty. Only defective sheets upon delivery are covered by warranty.\u003c\/p\u003e\n\u003ch2 data-section-id=\"1uesl8g\" data-start=\"882\" data-end=\"895\"\u003eFEATURES\u003c\/h2\u003e\n\u003cp data-start=\"1124\" data-end=\"1519\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Screenshot_2026-03-10_at_17-12-36_CORE_One_L_Satin_Powder-coated_Print_Sheet_Original_Prusa_3D_printers_directly_from_Josef_Prusa.png?v=1773159138\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1 class=\"sc-2ebcaf2d-0 jRsLfr\"\u003ePP powder-coated\u003c\/h1\u003e\n\u003cp data-start=\"0\" data-end=\"13\"\u003e\u003cstrong data-start=\"0\" data-end=\"13\"\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"15\" data-end=\"141\"\u003eThe heatbed has embedded magnets with a high Curie temperature. These magnets can securely hold removable spring steel sheets.\u003c\/p\u003e\n\u003cp data-start=\"143\" data-end=\"460\"\u003eThis print sheet is specifically designed for printing with polypropylene-based filaments, especially \u003cstrong data-start=\"237\" data-end=\"272\"\u003ePrusament PP Carbon Fiber Black\u003c\/strong\u003e. PP materials generally have lower adhesion on textured or satin print sheets. This sheet features a special surface treatment that increases adhesion and is ideal for Prusament PP.\u003c\/p\u003e\n\u003cp data-start=\"462\" data-end=\"556\"\u003eThe PP sheet has a slightly textured surface, similar to the \u003cstrong data-start=\"520\" data-end=\"555\"\u003eSatin Powder-coated Steel Sheet\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-start=\"558\" data-end=\"617\"\u003eYou can read more about the PP sheet in our online help article.\u003c\/p\u003e\n\u003cp data-start=\"619\" data-end=\"631\"\u003e\u003cstrong data-start=\"619\" data-end=\"631\"\u003eIMPORTANT!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"633\" data-end=\"875\"\u003eNever clean the PP sheet with acetone! Acetone partially dissolves the sheet's surface and leaves stains. It can also negatively affect both the adhesion properties and the sheet's lifespan. Read more about printing on the PP sheet in our online help article.\u003c\/p\u003e\n\u003chr data-start=\"877\" data-end=\"880\"\u003e\n\u003ch2 data-section-id=\"1uesl8g\" data-start=\"882\" data-end=\"895\"\u003eFEATURES\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Screenshot_2026-03-07_at_11-30-34_Core_ONE_L_PP_powder-coated_Print_Sheet_Original_Prusa_3D_printers_directly_from_Josef_Prusa.png?v=1772879415\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp data-start=\"897\" data-end=\"914\"\u003e\u003cstrong data-start=\"897\" data-end=\"914\"\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"916\" data-end=\"1347\"\u003eConsumable parts, such as PEI sheets (smooth, textured, PP, etc.), are not covered by warranty, as the coatings are designed to gradually wear over time, unless a failure is due to a material or manufacturing defect. Cosmetic damage, including but not limited to scratches, dents, cracks, or other cosmetic damage, is also not covered by warranty. Only sheets that are defective upon receipt are covered by warranty.\u003c\/p\u003e\n\u003cp data-start=\"1349\" data-end=\"1653\"\u003eAfter removing a 3D printed object, you may see a visible imprint on the sheet's surface. This is only a visual change: it leaves no marks on subsequent 3D printed parts and does not affect printing properties in any way. Therefore, it is not considered a basis for a claim.\u003c\/p\u003e\n\u003cp data-start=\"1655\" data-end=\"1955\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eDue to the temperatures the sheet is exposed to during printing, parts of the heatbed's texture may become embossed into the underside of the sheet, making some areas slightly shinier. This visual change does not negatively affect printing properties and is also not considered a reason for a claim.\u003c\/p\u003e\n\u003cp data-start=\"1655\" data-end=\"1955\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e \u003c\/p\u003e\n\u003ch1 class=\"Heading-sc-bb4ac814-0 gusCFV\"\u003ePA Nylon Powder-coated\u003c\/h1\u003e\n\u003cp data-start=\"49\" data-end=\"64\"\u003e\u003cstrong data-start=\"49\" data-end=\"62\"\u003eOVERVIEW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"66\" data-end=\"200\"\u003eThe heatbed has embedded magnets with a high Curie temperature. These magnets can securely hold removable spring steel sheets in place.\u003c\/p\u003e\n\u003cp data-start=\"202\" data-end=\"619\"\u003eThis print sheet is specially designed for printing polyamide-based filaments, especially \u003cstrong data-start=\"288\" data-end=\"325\"\u003ePrusament PA11 Carbon Fiber Black\u003c\/strong\u003e. The PA11 type generally has lower adhesion on textured or satin print sheets. This sheet features a special surface treatment that increases adhesion and is perfect for Prusament PA11. You can read more about the \u003cstrong data-start=\"535\" data-end=\"593\"\u003eDouble-sided Powder-coated PA Nylon Spring Steel Sheet\u003c\/strong\u003e in our knowledge base.\u003c\/p\u003e\n\u003cp data-start=\"621\" data-end=\"635\"\u003e\u003cstrong data-start=\"621\" data-end=\"633\"\u003eIMPORTANT!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"637\" data-end=\"924\"\u003eThe surface of this sheet must only be cleaned with plain water. Using common cleaning agents like IPA or acetone will quickly degrade the surface. Using glue stick is no longer necessary or recommended. To clean greasy areas, use plain water with a drop of dish soap.\u003c\/p\u003e\n\u003ch2 data-section-id=\"1uesl8g\" data-start=\"882\" data-end=\"895\"\u003eFEATURES\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Screenshot_2026-03-10_at_17-15-06_Core_ONE_L_PA_Nylon_Powder-coated_Print_Sheet_Original_Prusa_3D_printers_directly_from_Josef_Prusa.png?v=1773159310\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp data-start=\"49\" data-end=\"68\"\u003e\u003cstrong data-start=\"49\" data-end=\"66\"\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"70\" data-end=\"472\"\u003eConsumable parts, such as PEI sheets (smooth, textured, nylon, etc.), are not covered by warranty, as the coatings are designed to wear over time, unless the failure is due to a material defect or manufacturing defect. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage, is also not covered by warranty. Only defective sheets upon delivery are covered by warranty.\u003c\/p\u003e\n\u003cp data-start=\"474\" data-end=\"735\"\u003eDue to the temperatures the sheet is exposed to during printing, its surface will gradually become shinier or may develop minor, dull-toned areas. This visual change does not affect printing properties and is not considered a basis for a claim.\u003c\/p\u003e\n\u003cp data-start=\"737\" data-end=\"1029\"\u003eNote that on the \u003cstrong data-start=\"751\" data-end=\"772\"\u003eOriginal Prusa XL\u003c\/strong\u003e, wear on the PA Nylon sheet is especially visible at the Z-probing points, where the nozzle leaves visible marks on the surface. This does not affect the surface adhesion or overall printability. You can see examples of these marks in our knowledge base article.\u003c\/p\u003e\n\u003cp data-start=\"1031\" data-end=\"1271\"\u003eA new batch of PA Nylon sheets will be launched in July\/August 2024. The new version will feature a slightly coarser surface texture. This change does not affect the sheet's functional properties. You can also see the changes in our knowledge base article.\u003c\/p\u003e","brand":"Prusa Research","offers":[{"title":"Textured powder-coated","offer_id":55455371264334,"sku":"PCOL-TPC","price":379.0,"currency_code":"DKK","in_stock":true},{"title":"Smooth PEI","offer_id":55455371297102,"sku":"PCOL-SP","price":429.0,"currency_code":"DKK","in_stock":true},{"title":"PP powder-coated","offer_id":55435498357070,"sku":"PCOL-PP","price":599.0,"currency_code":"DKK","in_stock":true},{"title":"Satin powder-coated","offer_id":55455371329870,"sku":"PCOL-SPC","price":399.0,"currency_code":"DKK","in_stock":true},{"title":"PA Nylon powder-coated","offer_id":55455371362638,"sku":"PCOL-PA","price":599.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/5cbde2ed-a6bc-41c0-bf66-39ff6bc949e3.png?v=1772879461","url":"https:\/\/www.3dsaga.com\/en-no\/products\/prusa-core-one-l-print-sheet","provider":"3Dsaga.com","version":"1.0","type":"link"}