{"product_id":"bambu-cool-plate-supertack-pro","title":"Bambu Cool Plate SuperTack Pro","description":"\u003ch1 class=\"bbl-title-3 font-bold\"\u003eBambu Cool Plate SuperTack Pro\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eImproved adhesion for more stable printing with PLA and PETG\u003c\/li\u003e\n\n\u003cli\u003eFinely tuned reduction of adhesion upon cooling — easy removal of prints\u003c\/li\u003e\n\n\u003cli\u003eDurable coating, designed for long-lasting performance\u003c\/li\u003e\n\n\u003cli\u003eNatural surface texture that discreetly minimizes irregularities on the bottom surface\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Cool_Pro_Banner_PC.jpg?v=1768402084\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eWhat makes it Pro?\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003e25% longer lifespan\u003c\/li\u003e\n\n\u003cli\u003e10% lower operating temperature\u003c\/li\u003e\n\n\u003cli\u003eBetter scratch resistance\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Comparison_PC.jpg?v=1768402510\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSay goodbye to failed prints\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SuperTack Pro coating provides extremely strong adhesion for PLA and PETG filaments – even at lower heat bed temperatures. It increases print quality by eliminating adhesion issues, reduces warping when printing large objects, and also works well on uneven or difficult surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEliminates adhesion problems\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Screenshot_2026-01-14_at_15-55-18_Cool_Plate_SuperTack_Pro_Bambu_Lab_EU_Store.png?v=1768402542\"\u003e\u003cbr\u003e\u003cstrong\u003eReduces warping when printing large objects\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Warping_PC.jpg?v=1768402084\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLong-lasting performance\u003c\/strong\u003e\u003cbr\u003eThe SuperTack Pro coating is exceptionally durable and maintains its adhesive properties even after extensive use. This results in a longer lifespan for the build plate, reduces printing costs (less than 15% adhesion loss after 300 prints), and decreases the carbon footprint.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/Long_Lasting_PC.jpg?v=1768402585\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe test data was produced with PLA Basic filament and performed on the A1 3D printer.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmooth and natural surface finish\u003c\/strong\u003e\u003cbr\u003eThe SuperTack Pro coating can give the bottom surface of the printed object a smooth and matte texture, which blends more naturally with other surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/e87f31ec9593353ec3d24c75761c8416.webp?v=1768402629\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnergy efficient\u003c\/strong\u003e\u003cbr\u003eThe SuperTack Pro coating only requires a very low heat bed temperature to ensure printed objects adhere securely. This means you can save a significant amount of energy during heating, leading to lower electricity bills — and most importantly, helping to protect our planet.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/3db4fa25ffaf9337df3e65cc362b8ac0.webp?v=1768402628\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\n\u003cthead\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e\u003cstrong\u003eHeat bed temperature comparison\u003c\/strong\u003e\u003c\/th\u003e\n\n\u003cth\u003e\u003c\/th\u003e\n\n\u003cth\u003e\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003eHeat bed temperature with SuperTack\u003c\/strong\u003e\u003c\/td\u003e\n\n\u003ctd\u003e\u003cstrong\u003eHeat bed temperature with SuperTack Pro\u003c\/strong\u003e\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePLA\u003c\/td\u003e\n\n\u003ctd\u003e45 °C\u003c\/td\u003e\n\n\u003ctd\u003e40 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePETG\u003c\/td\u003e\n\n\u003ctd\u003e70 °C\u003c\/td\u003e\n\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow to remove prints from SuperTack Pro\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUse the scraper included with your printer to gently lift the print and then carefully pry it off. If the print is too firmly attached, you can heat the plate on the heat bed to 50 °C to make removal easier.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eAbout the build plate for H2S\u003c\/h3\u003e\n\u003cp\u003eThe H2S version differs from the H2D version by 1 mm in length. While this largely has no impact on the actual print dimensions, it may trigger a false error during build plate detection. To ensure the best user experience, the H2S version is expected to be available in February 2026. If you need it sooner, you can purchase the H2D version and simply ignore any build plate detection warnings during use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eUse the scraper included with your printer to gently lift the print and then carefully pry it off. If the print is too firmly attached, you can heat the plate on the heat bed to 50 °C to facilitate removal. The surface is soft, so be careful when using a scraper to avoid damage.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eSince the Vortek hotend holder occupies additional space, the H2C print bed is slightly smaller than the H2D. Therefore, the H2C and H2D build plates have different sizes. Make sure to select the correct model when purchasing.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo not\u003c\/strong\u003e print with TPU filament, as it will damage the build plate.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eA higher heat bed temperature improves adhesion. Adjust the temperature according to your specific needs to achieve the most appropriate level of adhesion.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eFor the X1, P1, and A1 series, before automatic leveling, it is necessary to repeatedly rub the nozzle against the special wiping area on the build plate to completely remove any residue on the nozzle tip. The coating in this specially designed wiping area will gradually wear down over time. This is normal and does not affect print quality or nozzle lifespan.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eThe Bambu Cool Plate SuperTack Pro is considered a wear-and-tear component that degrades over time. The warranty only covers manufacturing defects and not cosmetic damage such as scratches, dents, or cracks. Only defective plates upon receipt are covered by the warranty.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eSuperTack Pro provides good adhesion without the use of glue or frequent cleaning. If the surface becomes very dirty, it can be cleaned with water and dish soap. \u003cstrong\u003eDo not\u003c\/strong\u003e use organic solvents (especially acetone), as this will damage the SuperTack Pro surface.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003eBambu PLA Silk+ is supported on the Cool Plate SuperTack Pro thanks to improved layer adhesion. However, other PLA Silk materials may cause very strong adhesion to the SuperTack Pro plate, which can damage the printed objects. Therefore, it is not recommended to print with PLA Silk materials other than Bambu PLA Silk+. Users printing with third-party PLA Silk materials should select the \u003cem\u003eGeneric PLA Silk\u003c\/em\u003e preset in Bambu Studio and assess material compatibility based on specific conditions.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide for X1 Series \/ P1 Series \/ A1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1:\u003c\/strong\u003e Align the plate with the fixed points of the platform, with the plate name facing you.\u003cbr\u003e\u003cstrong\u003eStep 2:\u003c\/strong\u003e Lower the plate and secure it on the magnetic platform.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation guide for H2 Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1:\u003c\/strong\u003e Align the plate with the fixed points of the platform, with the plate name facing you.\u003cbr\u003e\u003cstrong\u003eStep 2:\u003c\/strong\u003e Lower the plate and secure it on the magnetic platform.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\"\u003e\n\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\"\u003e\n\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\n\u003cthead\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\n\u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/thead\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\n\u003ctd\u003eSpecially designed coating\u003cbr\u003eSpring steel plate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eThickness\u003c\/td\u003e\n\n\u003ctd\u003eCoating – 0.05 mm\u003cbr\u003eSteel plate – 0.4 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSurface temperature resistance\u003c\/td\u003e\n\n\u003ctd\u003eUp to 120 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eApplicable print size\u003c\/td\u003e\n\n\u003ctd\u003eX1C \/ P1P \/ P1S \/ A1 \/ P2S – 256 × 256 mm\u003cbr\u003eH2D \/ H2S – 350 × 320 mm\u003cbr\u003eH2C – 330 × 320 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePackaging size\u003c\/td\u003e\n\n\u003ctd\u003eX1C \/ P1P \/ P1S \/ A1 \/ P2S – 315 × 295 × 15 mm\u003cbr\u003eH2D \/ H2S – 393 × 380 × 15 mm\u003cbr\u003eH2C – 393 × 380 × 15 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePackaging weight\u003c\/td\u003e\n\n\u003ctd\u003e0.22 kg\u003cbr\u003e0.48 kg\u003cbr\u003e0.46 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"P2S\/A1\/ P1 series\/ X1C","offer_id":55278553825614,"sku":"FAP032","price":269.0,"currency_code":"DKK","in_stock":true},{"title":"H2C","offer_id":55278553858382,"sku":"FAP041","price":479.0,"currency_code":"DKK","in_stock":false},{"title":"H2D\/H2S","offer_id":55278553891150,"sku":"FAP040","price":495.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2115\/1637\/files\/H2C-FAP040FAP041.png?v=1768402433","url":"https:\/\/www.3dsaga.com\/nb-se\/products\/bambu-cool-plate-supertack-pro","provider":"3Dsaga.com","version":"1.0","type":"link"}