KØB NU OG FÅ FRI FRAGT TIL PAKKESHOP
På alle ordrer over 500,- (gælder kun DK)
1-2 LEVERINGSDAGE
Bestil inden kl. 12 og vi sender samme dag.
14 DAGES RETURRET
Bambu Lab
Bambu Lab A1 Combo + 4 kg Bambu Lab PLA Basic
Bambu Lab A1 Combo + 4 kg Bambu Lab PLA Basic
Kampagne slutter om
00D
:
00T
:
00M
:
00S
Normalpris
3.402,40 DKK
Normalpris
3.564,00 DKK
Udsalgspris
3.402,40 DKK
Stykpris
pr.
Inklusive moms.
Levering beregnes ved betaling.
Fri fragt til pakkeshop ved køb over 500,-
Sendes fra Roskilde DK
Lokalt servicecenter i Roskilde
1 års garanti
Kundeservice
Email: hello@3dsaga.com
Telefon: +45 69 15 31 11
Alle hverdage fra 10.00 - 15.00
Showroom:
Mandag - torsdag: 09.30 – 15.30
Fredag: 09.30 – 15.00
Bambu Lab A1 Combo + 4 kg Bambu Lab PLA Basic
Nogle af produktoplysningerne her er genereret af AI og kan være ufuldstændige eller forkerte. Kontrollér altid producentens egen dokumentation, før du handler ud fra dem.
A1 Printer – Body
Chassis
Steel + Extruded Aluminum
Dimensions
465 x 410 x 430 mm³
Net Weight
8.3 kg
Build Volume
256 x 256 x 256 mm³
A1 Printer – Software
Slicer
Bambu StudioSuperSlicerPrusaSlicerCura
Slicer Supported OS
MacOSWindows
A1 Printer – Toolhead
Nozzle
Stainless Steel
Hot End
All-Metal
Hot End Fan
Closed Loop Control
Extruder Gears
Hardened Steel
Filament Cutter
Yes
Max Hot End Flow
28 mm³/s @ABS (Model: 150×150 mm single wall; Material: Bambu ABS; Temperature: 280 ℃)
Part Cooling Fan
Closed Loop Control
Filament Diameter
1.75 mm
Max Hot End Temperature
300 ℃
Nozzle Diameter (Included)
0.4 mm
Nozzle Diameter (Optional)
0.2 mm0.6 mm0.8 mm
A1 Printer – Electrical
Max Power
1300W@220V350W@110V
Input Voltage
100-240 VAC, 50/60 Hz
A1 Printer – Build Plate
Compatible Build Plates
Bambu Textured PEI PlateBambu Cool PlateBambu High Temperature PlateBambu Dual-Texture PEI Plate
Max Build Plate Temperature
100 ℃
A1 Printer – Motion System
Max Speed of Toolhead
500 mm/s
Max Acceleration of Toolhead
10000 mm/s²
A1 Printer – Wireless (RF)
Protocol
IEEE 802.11 b/g/n
Frequency Range (CE)
2412 MHz - 2472 MHz
Frequency Range (FCC)
2412 MHz - 2462 MHz
Frequency Range (SRRC)
2400 MHz - 2483.5 MHz
Transmitter Power EIRP (FCC)
≤ 21.5 dBm
Transmitter Power EIRP (CE/SRRC)
≤ 20 dBm
A1 Printer – Sensors & Safety
Filament Odometry
Yes
Monitoring Camera
Low Rate Camera (up to 1080P), Timelapse Supported
Power Loss Recovery
Yes
Filament Tangle Sensor
Yes
Filament Run Out Sensor
Yes
A1 Printer – Control & Display
Display
3.5 inches 320×240 IPS Touch Screen
Storage
Micro SD Card
Connectivity
Wi-FiBambu-Bus
Control Interface
Touch ScreenAPPPC Application
Motion Controller
Dual-Core Cortex M4
A1 Printer – Compatible Filaments
Ideal
PLAPETGTPUPVA
Not Recommended
ABSASAPCPAPETCarbon/Glass Fiber Reinforced Polymer
PLA Basic Filament – Printing Settings
Max Printing Speed
< 300 mm/s
Nozzle Temperature
190 - 230 °C
Recommended Build Plates
Cool PlateHigh Temperature PlateTextured PEI Plate
Bed Temperature (with Glue)
35 - 45 °C
Printing and Storage Humidity
< 20% RH (Sealed, with Desiccant)
Drying Settings (Blast Drying Oven)
55 °C, 8 h
PLA Basic Filament – Physical Properties
Density
1.24 g/cm³
Melt Index
42.4 ± 3.5 g/10 min
Melting Temperature
160 °C
Heat Deflection Temperature
57 °C
Vicat Softening Temperature
57 °C
PLA Basic Filament – Mechanical Properties
Bending Modulus
2750 ± 160 MPa
Impact Strength
26.6 ± 2.8 kJ/m²
Bending Strength
76 ± 5 MPa
Tensile Strength
35 ± 4 MPa
Breaking Elongation Rate
12.2 ± 1.8 %