Anycubic PLA+ Refill (no spool)

1.75mm 1kg

Product features
● Twice the toughness of PLA Basic
● Flexural modulus: 3980 ± 360 MPa
● Clog resistant
● Easy to print – beginner friendly
● Environmentally friendly and vibrant colors
● Increases efficiency with intelligent identification

Anycubic PLA+ Refill Filament

High Toughness | Excellent Quality | Environmentally Friendly

Ways to get Anycubic filament spools

1. Buy Anycubic's reusable spools.

2. Reuse your previous spools.

3. Print your own spool from Makeronline.

Twice the toughness

With 2× higher toughness than standard PLA, PLA+ filaments offer superior impact strength and structural stability – even under stress. These high-performance materials maintain dimensional accuracy and extend the lifespan of 3D printed parts, making them ideal for technical components and load-bearing parts.

3980 ± 360 MPa
Flexural Modulus

Silky smooth and even

Made from high-quality raw materials, the filament is free of bubbles and impurities. With a diameter tolerance of < ±0.02 mm, it ensures uniform extrusion, minimal nozzle clogging, and clean and smooth surfaces.

Incredibly easy to print

Compatible with standard PLA printing parameters, so even beginners can easily achieve consistent results after inserting a new spool of Anycubic filament.

Environmentally friendly

Anycubic PLA+ is made from an environmentally friendly, plant-based material with lower odor and no irritating emissions during printing.

Vibrant colors

Like PLA filaments, Anycubic PLA+ is available in a wide range of colors, making it ideal for education, design, and creative projects.

Reusable filament spool

The reusable filament spool features a threaded connection system designed for increased stability with spool-less filaments. The design significantly reduces the risk of tangling, filament scattering, and operating errors.

Increases efficiency with intelligent identification
The filaments are equipped with intelligent identification chips that integrate seamlessly with ACE Pro. This allows for automatic identification of print information and enhances the printing experience.

*The intelligent identification function requires an internet connection and Anycubic filaments that are compatible with intelligent identification.

Filament installation

1. Mark the filament
Remove both stickers and both chips (if present). Apply new chip stickers to both spool flanges.

2. Insert the filament
Open the spool, align the filament with the locking mechanism, and click it into place.

3. Lock the spool
Close the spool, press it firmly together, and turn it until you hear a "click" confirming it is locked.

4. Prepare the filament
Once the spool is locked, remove the fastening tape and guide the filament through the hole in the spool.

Model view

File downloads

Filament MSDS

Filament TDS

RoHS

REACH

Specifications

Preparation

Print parameters

Physical properties

Mechanical properties

Filament properties