BUY NOW AND GET FREE SHIPPING
For purchases over 500,- (only valid in DK)
1-2 DELIVERY DAYS
Order before 12 noon and we will ship the same business day
14 DAY RETURN RIGHT
Out of stock
Free shipping on orders over 500,- in DK
Ships from Roskilde DK
1 year warranty
Local service center
Bambu Lab PLA Sparkle
1.75mm 1kg
Product features
-
Particularly sparkling appearance
-
Relatively high impact strength
-
Comes with a basic reusable spool
-
Diameter: 1.75mm ± 0.03mm
Precautions for use
-
Compatible with AMS & AMS lite
-
0.2mm nozzle is not compatible
Bamboo PLA Sparkle
Bambu PLA Sparkle is a filament with next-level aesthetics that combines strength and shimmer. Thanks to built-in metal particles, Bambu PLA Sparkle adds a special sparkling look to your prints that will stand out from the crowd.
However, it is not recommended to use a 0.2 mm nozzle as clogging may occur.
Take your 3D printing projects to new heights with Bambu PLA Sparkle !
Examples of PLA Sparkle prints
Compatibility with accessories
| Accessories | Recommended | Not recommended |
|---|---|---|
| Building board | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | / |
| Hotend | Hotend with hardened steel nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with stainless steel nozzle 0.4 mm |
Hotend with stainless steel nozzle 0.2 mm |
| Glue | Bamboo Liquid Glue Glue stick |
/ |
PLA Sparkle Hex Code Table
| Color | Hex Code | Display |
| Classic Gold Sparkle | #CEA629 | |
| Slate Grey Sparkle | #8E9089 | |
| Crimson Red Sparkle | #792B36 | |
| Royal Purple Sparkle | #483D8B | |
| Alpine Green Sparkle | #3F5443 | |
| Onyx Black Sparkle | #2D2B28 |
RFID for intelligent printing
All print parameters are embedded in RFID and can be read via our AMS (Automatic Material System) .
Paste and print – no complicated setup steps!
Recommended print settings
| Parameters | Value |
|---|---|
| Drying settings (hot air drying oven) | 55°C, 8 hours |
| Humidity during printing and storage | < 20% RH (sealed, with desiccant) |
| Nozzle temperature | 190–230 °C |
| Building board temperature (with glue) | 35–45°C |
| Print speed | < 250 mm/s |
Physical properties
| Property | Value |
|---|---|
| Density | 1.26 g/cm³ |
| Vicat softening temperature | 57 °C |
| Heat deflection temperature | 55 °C |
| Melting temperature | 156 °C |
| Melting index | 34.2 ± 3.3 g/10 min |
Mechanical properties
| Property | Value |
|---|---|
| Tensile strength | 33 ± 3 MPa |
| Elongation at break | 11.7 ± 0.7% |
| Flexural modulus | 2310 ± 140 MPa |
| Bending strength | 63 ± 4 MPa |
| Impact strength | 66.5 ± 3.6 kJ/m² |
Downloads
Printing tips
• Drying conditions: 55°C for 8 hours. Store in a dry environment after use. Dry the material before use if it has absorbed moisture.
For more details, refer to: Filament drying guide on WIKI .
Contents of the box
