Bamboo 4-in-1 PTFE Adapter

Overview

For X1 Series / P1 Series / H2D / H2S / P2S

The Bambu 4-in-1 PTFE adapter is an adapter used to connect PTFE tubing. Compared to the original PTFE tubing connector, the 4-in-1 adapter can connect 4 feeder modules to the printer at the same time (up to 7 different filaments : 1 AMS and 3 other filaments).

It helps users connect the printer to AMS along with other filaments that are not compatible with AMS , such as TPU 95A, Bambu PET-CF , and other brands of carbon or glass fiber filaments.

For H2C

The 4-in-1 PTFE adapter can simultaneously connect four filament input modules to the printer, allowing printing with up to 7 colors of filament . It also allows the printer to connect to both AMS and non-AMS compatible filaments such as TPU95A, Ta Zhu PET-CF , and other filaments containing carbon or glass fiber .

Installation

For X1 Series / P1 Series / H2D / H2S / P2S

Read more about replacing the Bambu 4-in-1 PTFE adapter on the Bambu Lab Wiki .

For H2C

Read more about replacing the Bambu 4-in-1 PTFE adapter on the Bambu Lab Wiki .

Compatibility

• X1 Series

• P1 Series

• H2D

• H2S

• P2S

• H2C

• H2C Laser

Contents of the box

For X1 Series / P1 Series / H2D / H2S / P2S

• Bambu 4-in-1 PTFE adapter × 1

For H2C

• Bambu 4-in-1 PTFE adapter × 1

• Bambu 4-in-1 PTFE Adapter Filament II Cleaning Pad × 5

Instructions for use

The Bambu 4-in-1 PTFE adapter is designed with a clear direction of use , as shown in the figure below.

1. When AMS is used:

• Connect the PTFE hose from the tool head to the OUT end of the Bambu 4-in-1 PTFE adapter.

• Connect the PTFE tubing from the buffer outlet to one of the IN ends .

• Directly insert up to three filaments into each hole on the IN end of the Bambu 4-in-1 PTFE adapter.

2. When AMS is not used:

• Connect the PTFE hose from the tool head to the OUT end of the Bambu 4-in-1 PTFE adapter.

• Directly insert up to four filaments into each hole on the IN end of the Bambu 4-in-1 PTFE adapter.

⚠️ It is important to note that incorrect connection can cause filament blockage . Therefore, always ensure that the installation direction is correct .

Product specifications