Bambu High Flow Hotend - H2/P2S

Product features

Currently, the H2D Dual-Nozzle feature only supports nozzles of the same size.

True high flow: Save up to 30% of your time

The Bambu High Flow nozzle's optimized melt zone enables a significantly higher volumetric velocity , delivering up to 62.5% higher maximum volumetric velocity¹ and reducing print time by up to 30%² without any hassle. The larger your print, the more time you save – especially for prints with extensive infill.

¹ Tested with ABS, Ø240 mm single-wall cylinder, layer thickness 0.2 mm, 1.0 mm outer wall, nozzle temperature 280 ℃, spiral vase mode activated.
² Tested with PLA Basic, 15% infill, 300 × 300 × 300 mm cube.

High-speed precision: Sharp details every time

Say goodbye to under-extrusion, rough surfaces and loss of detail. Unlike standard high-flow nozzles, Bambu's high and consistent extrusion ensures sharp edges, flawless texturing and ultra-smooth surfaces – every time.

Upgrade now and print faster without compromise !

Printer compatibility

The Bambu High Flow nozzle is compatible with the A1 series , but it will not increase the volumetric velocity . In other words, the High Flow nozzle works like a standard nozzle on the A1 series.

Filament compatibility

Read more about filament compatibility on the Bambu Lab Wiki .

Quick Swap nozzle design

Make sure the hotend is cool before changing the nozzle and avoid touching the heating block (the bottom part of the hotend) to prevent the risk of burns.

Read more about replacing the Hotend onBambu Lab Wiki

Product specifications