Magigoo Pro Kit (4 pcs.) - The 3D printing adhesive

The Magigoo Pro Kit is a professional set of specialized adhesive pens designed to handle even the most demanding technical filaments. The kit includes Magigoo Pro PA (nylon/PA), Pro PC (polycarbonate), Pro PP (polypropylene), and Magigoo Original (PLA, ABS, PETG, TPU) —all formulated to ensure reliable first-layer adhesion at high temperatures and easy “pop-off” release after cooling—without the use of tools. A cleaning cloth is also included for quick and easy cleaning with water.

Key features

• Contains 4 adhesives for PA, PC, PP and standard thermoplastics
• Ensures strong adhesion on hot building boards—no warping
• Easy to remove print after cooling—no scraping required
• Water-based, non-toxic and odorless formulas
• Pen applicators for precise and clean application
• Comes with cleaning cloth for easy maintenance

Designed for technical filaments

Each adhesive is adapted to a specific filament type:
• Magigoo Pro PA for nylon and glass/carbon reinforced PA
• MagigooPro PC for high temperature polycarbonate and PC blends
• MagigooPro PP for low-surface energy polypropylene
• Magigoo Original for everyday filaments like PLA, ABS, PETG, TPU

Strong adhesion & easy release

Pro Kit adhesives hold up well at high temperatures and release naturally when cooled, allowing the print to “pop” off—no tools, no damage. Ideal for both technical and general prints.

Safe, clean & convenient

All formulations are water-based, odorless, and non-toxic. Pen applicators prevent splashes and keep your work area neat. After printing—dry the surface with the included cloth and lukewarm water—no solvents required.

Professional all-in-one solution

The Pro Kit provides a complete solution for makers, engineers and print farms with adhesives for all major filament types. It minimizes warping, provides clean prints and is easy to maintain in a compact and transportable format.

Quick start guide

1. Shake thoroughly before use.

2. Apply a thin layer of pen to a cold, clean plate—press the tip down to activate.

3. Heat and print according to the filament's specifications.

4. Cool completely—the workpiece will be released automatically.

5. Wipe surface with damp cloth between prints; rinse with water if necessary.

6. Tip: For larger prints, use approx. 20 mm edge; if adhesion is too strong, moisten the plate slightly.

SECURITY:

These products are intended for professional use. Please read the instructions for use carefully before use.

Using this product with filament types other than those it is intended for may cause excessive adhesion and damage your build plate.

Some products may contain corrosive substances or substances that can irritate the eyes. Wash hands after use. Preferably use rubber gloves. Read the safety data sheet (SDS) or contact the manufacturer if necessary.

The bottle applicator has a spring-loaded valve inside. To activate it, press the tip firmly against the build plate. When pressing on the sides of the bottle, make sure that the applicator does not pop out.

TIPS:

• For larger prints, a brim (edge) of 20 mm is recommended.

• If the print is too stuck, it is recommended to moisten the build plate with a little water and slowly work the water under the print – this makes it easier to remove the part.