Ruthex M2.5 threaded insert – Rx-M2.5x5.7 - 70 pcs.

The Ruthex threaded nuts can subsequently be inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa by means of heat or ultrasound. By using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Threaded inserts for your 3D printed parts

The Ruthex threaded nuts can subsequently be inserted into parts of 3D printers from e.g. Anycubic, Creality or Prusa by means of heat or ultrasound. By using heat from a soldering iron or ultrasound, the press-fit nuts are simply embedded into a blind or through hole.

Firm grip with easy handling

Thanks to the geometry of the threaded bush, it sits firmly in the printed part. The opposite helical knurled nuts ensure a balanced high tightening and loosening torque as well as a high tightening force. The guide has made insertion much easier.

Stable and durable screw threads

The internal threaded inserts are made of the highest quality brass, ensuring optimal corrosion resistance and thermal conductivity. This means that each press-in nut can be used for a long time and is easy to use. It is also possible to reuse the screw threads by carefully removing them from the printed part when they are no longer needed.

Suitable for various types of plastic

The inserts are designed for all thermoplastics. The knurled nuts hold, for example, in PLA, PETG, ABS, PPS, PP and many more. As soon as the plastic of the workpiece around the brass bush cools down and hardens again, the internally threaded bush is firmly anchored.

Practical threaded insert set

The Ruthex threaded insert set RX-M2.5x5.7 consists of 70 press-in nuts with M2.5 internal thread and a length of 5.7 mm. The threaded bushes can be inserted by means of ultrasound and heat embedding.