Bambu Lab PETG Basic

The all-new Bambu Lab PETG Basic has been upgraded to deliver strength on par with PLA, while retaining its characteristic toughness. This makes it ideal for structural and functional parts that need to withstand higher stress without becoming brittle.

With improved resistance to water, UV, and temperature, it remains an excellent choice for outdoor accessories, functional tools, and everyday models. The refined formulation also enhances printability by reducing stringing and providing a smoother surface finish.

Stronger than ever – and still tough

Thanks to the upgraded formula, Bambu Lab PETG Basic now matches the strength of PLA Basic, while retaining the toughness necessary to absorb impact. It can handle greater loads and stress than before, making it highly suitable for structural household parts and practical tools such as holders, wall hooks, brackets, and clips.

Comparison of Mechanical Properties

A Cost-Effective Choice for Outdoor Prints

Engineered for long-lasting performance in outdoor environments, Bambu Lab PETG Basic combines durability with affordability. Its high resistance to water, UV, and temperature makes it a highly cost-effective solution for outdoor applications. From garden labels to bathroom accessories, it is a practical and budget-friendly choice for prints that need to withstand everyday conditions.

Less Stringing, Superior Surfaces

The refined formulation reduces stringing thanks to lower moisture sensitivity compared to typical PETG filaments, resulting in smoother surfaces and sharper details.

RFID for Intelligent Printing

All print parameters are embedded in the RFID and can be read by the Bambu Lab AMS (Automatic Material System). Simply insert the filament and print – no more tedious setup steps.

Accessory Compatibility

Print Tips & Installation Guide

1. Dry before use for higher print quality. If PETG Basic has been exposed to air with relative humidity above 50% for more than 72 hours, it should be thoroughly dried before printing to ensure optimal print quality.

• Hot Air Oven: 65°C for 8 hours
• X1 Series, P Series & H2 Series Heat Plate: 80°C for 12 hours
• AMS 2 Pro & AMS HT: 65°C for 8 hours
• Recommended Print & Storage Humidity: <20% RH (sealed with desiccant)

2. PETG Basic adheres strongly to PEI plates. After printing, the build plate should cool down before removing the model to avoid damaging the bottom surface.

3. For more detailed guidance, please refer to the Bambu Lab PETG Wiki.

Accessory Compatibility

• AMS Series (recommended): AMS, AMS 2 Pro, AMS HT, AMS lite
• Build Plates (recommended): Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate
• Hotend: All sizes and materials supported