Prusament PETG Glitter 1.75mm 1kg

Glitter colors

Prusament PETG is a high-quality filament manufactured by Prusa Research with exceptional strength, flexibility, and ease of use. Developed for functional parts and everyday 3D printing, it combines the durability of PET with the printability of PLA. Each spool is carefully produced and tested to ensure precise diameter, consistent color, and reliable results.

Key Features

• Produced in-house by Prusa Research with full quality control
• ±0.02 mm diameter precision for smooth and stable extrusion
• High strength and temperature resistance up to 90 °C
• Excellent layer adhesion and minimal warping
• Easy to print with on a wide range of 3D printers
• Available in both matte and glossy color variants
• Recommended settings: nozzle 250 °C, print bed 80 °C

About PETG

PETG is one of the most commonly used filaments. Its strength and durability make it an excellent choice for printing various mechanically stressed parts, such as different holders or clamps. Due to its excellent layer-to-layer adhesion, PETG prints are ideal for waterproof applications both indoors and outdoors. In addition, PETG is a tough material with good heat resistance. The 'G' in the abbreviation stands for a glycol-modified substance that is part of the manufacturing process. This modifies the properties of PET, making it easier to print, less brittle, and more clear, especially when printing with semi-transparent variants.

PETG has low thermal expansion, so even when printing large objects and without an enclosed environment, it rarely lifts from the bed and warps. Furthermore, PETG is tougher and less brittle than PLA. It has an appropriate amount of flexibility that can prevent parts from breaking under stress. We use PETG to print parts for our own printers!

What can you expect?

Prusament PETG is our own internally manufactured filament. The entire production process is carefully monitored and tested – we guarantee a precision of ±0.02 mm and very consistent colors. You can inspect the parameters of every single spool we've produced on prusament.com. Check out the sample spool!

Made in-house by Josef Prusa

We were not satisfied with the quality of filaments available on the market. That's why we decided to make our own! Prusa Research is the only 3D printer manufacturer with its own filament production.

Premium quality materials and thorough testing

The entire manufacturing process is monitored and tested – filament diameter, color consistency, and mechanical properties – to ensure every spool is perfect.

±0.02 mm guaranteed manufacturing precision

We believe that the industry standard of 0.05 mm is not sufficient for perfect 3D printing. That's why we guarantee ±0.02 mm precision and very consistent colors in our filaments.

High quality that you can check yourself

We are the only manufacturer that allows you to inspect the parameters of every single filament spool. Scan the QR code on the spool to see all details online (check the sample spool).

Print Setup

Nozzle: 250 ±10 °C
Heated bed: 80 ±10 °C
Recommended steel surface: Textured / Satin

Before printing, please read our dedicated article and material table on preparing the print surface.

Basic properties

Color Match Guide

Beginner Tips and Tricks

Unlike PLA or ABS, PETG tends to flow a bit and can leave plastic strands on your print. We recommend drying the filament before printing, as described here. If stringing still occurs, you can counteract it by increasing retraction and adjusting the hotend temperature — but if you're using our filament presets in PrusaSlicer, we've already done this for you, and the amount of stringing should be minimal. You can also remove the strands afterwards by briefly applying a heat gun to the finished print.

Notes

• This PETG is manufactured in-house by Prusa Research.

• 1.75 mm filament is produced with a precision of ±0.02 mm.

• Before printing, ensure that the heated bed surface is clean, as described in the 3D Printing Handbook.

• If you choose a 2 kg spool, you must download and print the holder for 2 kg spools, as it does not fit the standard spool holder.

• To dry the filament, follow the instructions in our article.