Anycubic DLP Craftsman resin

DLP-print fortjener bedre resin

De præcisionsmæssige fordele ved DLP-teknologi fortjener bedre resin. Når man taler om 3D-print, fokuserer de fleste på opløsningen af 3D-printere. Men erfarne skabere ved, at materialerne er lige så vigtige som selve printeren for at få det endelige resultat til at se godt ud.

Ekstrem høj præcision

Anycubics DLP-printer byggede den samme 3D-model to gange – henholdsvis med DLP Craftsman resin og almindelig resin til sammenligning. Når man zoomer ti gange ind på modellens overflade, kan man se, at DLP Craftsman resin giver en glat og detaljeret overflade, mens almindelig resin får en sløret overflade med tydelige laglinjer.

Ekstra lang holdbarhed

Andre resinprodukter på markedet har kun en holdbarhed på ét år. Takket være en opgraderet formel har Anycubic DLP Craftsman resin en holdbarhed på op til halvandet år. For at sikre din sikkerhed bør du bruge handsker under brug for at undgå direkte hudkontakt og holde rummet ventileret.

Specielt udviklet til DLP 3D-printere

I september 2021 blev Anycubic Photon Ultra den første forbruger-3D-printer med DLP-teknologi i branchen. I 2022 tog Anycubic et vigtigt skridt fremad i DLP-teknologien, da Anycubic Photon D2 blev lanceret. Denne DLP Craftsman Resin er udviklet til at udnytte den høje præcision i printningen fuldt ud.

Recommended Printing Parameters

Printer Model	Layer Thickness	Exposure Time	Light-Off Time	Bottom Exposure Time	Bottom Layer	Anti-Aliasing Level	Z Lift Distance	Z Lift Speed	Z Retract Speed
Photon Mono M7 Max	0.05mm	2s	0.5s	30s	5	1	8mm	6mm/s	6mm/s
Photon Mono M7	0.05mm	2.2s	0.5s	25s	4	1	8mm	6mm/s	6mm/s
Photon Mono 4	0.05mm	2.8s	1s	30s	5	1	6mm	4mm/s	6mm/s
Photon Mono 4 Ultra	0.05mm	2.6s	1s	30s	5	1	5mm	8mm/s	8mm/s
Photon Mono M7 Pro	0.05mm	2s	0.5s	25s	4	1	8mm	6mm/s	6mm/s
Photon Mono M5s Pro (Normal printing mode)	0.05mm	3.6s	0.5s	30s	5	1	8mm	6mm/s	6mm/s
Photon Mono M5s Pro (Fast printing mode)	0.1mm	4s	0.5s	30s	5	1	5mm	20mm/s	20mm/s
Photon Mono M5s (Normal printing mode)	0.05mm	3s	0.5s	30s	5	1	8mm	6mm/s	6mm/s
Photon Mono M5s (Fast printing mode)	0.1mm	3.4s	0.5s	30s	4	1	5mm	20mm/s	20mm/s
Photon Mono M5	0.05mm	3s	0.5s	30s	5	1	8mm	6mm/s	6mm/s
Photon M3 Max	0.05mm	2s	2.5s	35s	6	1	8mm	3mm/s	4mm/s
Photon Mono X 6Ks	0.05mm	3s	0.5s	20s	5	1	8mm	2mm/s	3mm/s
Photon Mono X2	0.05mm	2.5s	0.5s	20s	5	1	8mm	2mm/s	3mm/s
Photon Mono 2	0.05mm	2.5s	1s	25s	5	1	6mm	4mm/s	6mm/s
Photon D2	0.05mm	2.5s	1s	28s	5	16	5mm	2mm/s	3mm/s
Photon M3 Plus	0.05mm	2s	0.1s	23s	6	1	6mm	6mm/s	6mm/s
Photon M3	0.05mm	2s	0.5s	23s	4	1	6mm	3mm/s	4mm/s
Photon M3 Premium	0.05mm	2.5s	0.5s	25s	2	1	8mm	6mm/s	6mm/s
Photon Ultra	0.05mm	2s	1s	35s	4	4	5mm	2mm/s	2mm/s
Photon Mono X	0.05mm	2s	0.5s	30s	8	1	8mm	4mm/s	4mm/s
Photon Mono 4K	/	/	/	/	/	/	/	/	/
Photon Mono X 6K	0.05mm	2.5s	0.5s	40s	8	1	8mm	2mm/s	3mm/s
Photon Mono SQ	/	/	/	/	/	/	/	/	/
Photon Mono SE	/	/	/	/	/	/	/	/	/
Photon Mono	0.05mm	2.5s	0.5s	40s	6	1	6mm	4mm/s	6mm/s
Photon S	/	/	/	/	/	/	/	/	/

Instructions for Use

(1) Before use:
Shake the liquid resin before use;
Clean the resin tank and the molding platform to keep the bottom of the resin tank in light
transmission.

(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements;
Select the correct print parameters and settings for printing.

(3) After use:
After printing, please use the matching tools for post-processing, including blade, diagonal
pliers,tweezers,containers,gloves;
ethanol(≥95%),lactate or isopropyl alcohol cleaning solution;

(4) Post-processing steps:
A. Remove the printed model from the molding platform with a blade;
B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then taken
out and drained; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.
C.Proper processing, such as removing support, polishing, coloring, etc.