BUY NOW AND GET FREE SHIPPING
For purchases over 500,- (only valid in DK)
1-2 DELIVERY DAYS
Order before 12 noon and we will ship the same business day
14 DAY RETURN RIGHT
Ikke på lager
Gratis frakt på bestillinger over 500,- i DK
Skip fra Taastrup DK
1 års garanti
Lokalt servicesenter
Bambu Lab PLA Marble
Product features
-
Natural stone-like texture
-
Comes with basic reusable spool
-
Diameter: 1.75mm +/- 0.03mm
Caution when using
-
Compatible with AMS & AMS Lite
-
Not compatible with 0.2mm nozzle
Bamboo PLA Marble
Bambu PLA Marble mimics the look of natural stone.
With inorganic particles in its composition, it provides a vibrant stone-like texture that can resemble marble, granite or brick. It adds a touch of nature to your prints and provides an impressive finish to your projects.
Accessory compatibility
| Recommended | Not recommended |
|---|---|
| Building board | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate |
| Hotend | Hotend with hardened steel nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with stainless steel nozzle 0.4 mm |
| Glue | Bamboo Liquid Glue |
| Glue stick | / |
PLA Marble Hex Code Table
| Color | Hex Code | Display |
| White Marble | #F7F3F0 | |
| Red Granite | #AD4E38 |
RFID for intelligent printing
All printing parameters are embedded in RFID, which can be read via our AMS (Automatic Material System).
Load and print! No more time-consuming setup steps.
Recommended print settings
-
Drying settings (Blast Drying Oven) : 55 °C, 8 hours
-
Printing and storage container humidity : < 20% RH (tightly closed with desiccant)
-
Nozzle temperature : 190 – 230 °C
-
Bed temperature (with glue) : 35 – 45 °C
-
Printing speed : < 250 mm/s
Physical properties
-
Density : 1.22 g/cm³
-
Vicat softening point : 57 °C
-
Heat Deflection Temperature : 56 °C
-
Melting temperature : 156 °C
-
Melt Index : 32.2 ± 4.5 g/10 min
Mechanical properties
-
Tensile strength : 33 ± 4 MPa
-
Elongation at break : 6.7 ± 0.5%
-
Flexural modulus : 2920 ± 180 MPa
-
Bending strength : 75 ± 5 MPa
-
Impact strength : 24.0 ± 2.5 kJ/m²
Download
Printing tips
-
Drying conditions : 55°C for 8 hours. Store in a dry environment after use. Dry the material before use if it has absorbed moisture. For more details, see: Filament drying instructions on WIKI .
Contents of the box
