Only five ingredients – all certified for food contact

Most food contact filaments are only tested as a finished product. Bambu Lab PLA Pure, however, is tested ingredient by ingredient. From base material to color pigment, it consists of only five ingredients, and each one is certified according to EU food safety requirements. This is the first time in this product category – and still the only filament of its kind.

UL GREENGUARD certified – cleaner air during indoor printing

PLA Pure is certified according to UL GREENGUARD 2904, the recognized standard for emissions from 3D printers. The particles and volatile organic compounds (VOCs) emitted by the material during printing are below the levels found in an average kitchen, living room, or office – cleaner than the air you already breathe.

In a 4-hour continuous print test conducted by an accredited international laboratory, PLA Pure generated lower emissions of PM2.5 and PM10 particles than a third-party PLA filament under identical conditions.*

Certified toy safety – made for little hands

PLA Pure is certified according to EN 71-3*, the EU safety standard for toy materials. The material is designed for models that are touched, held, and played with.

A plate for the play kitchen. A toy truck. An activity toy for the cat. PLA Pure is made for little hands and everyday moments at home.

Made for everyday objects

Bambu PLA Pure is tested according to EU Regulation No. 10/2011, which is the EU's central regulation for plastic materials intended for food contact. This high degree of purity makes PLA Pure suitable for the items you use most: children's toys, household utensils, and small objects that are often in contact with your hands.

Trouble-free printing

Fewer additives. Cleaner composition. PLA Pure not only sets a higher standard for safety – it also prints more smoothly and reliably. Reduced residual material* helps minimize nozzle clogging and ensures consistent extrusion, spool after spool.

Note: XY values indicate strength and toughness within print layers, while Z values describe properties across layers (layer bonding). PLA Pure generally has mechanical properties comparable to PLA Basic and better layer adhesion than the compared third-party food-contact PLA.

Cleaner formula. Proven strength.

Fewer additives don't mean weaker prints. PLA Pure matches Bambu PLA Basic in mechanical performance, with layer adhesion comparable to most PLA on the market.
Purity and strength – without compromise.

Even without prior drying, PLA Pure produces significantly less "stringing" than typical third-party PLA. Fewer loose filament strands. Cleaner surfaces. Less residue on the items you use every day.

RFID for intelligent printing

All print parameters are embedded in RFID, which can be read via our AMS (Automatic Material System).
Load. Synchronize. Print. No setup, no guesswork – just reliable results.

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Hex Code

EU 10/2011 Food Contact Report

EN 71-3 Toy Safety Report

Print Tips

1. Print Tips

The food contact certification applies to the filament itself. The production of food-safe printed parts depends on the cleanliness of equipment (especially the nozzle), the printing environment, and other factors.

Due to layer lines, printed parts are not suitable for holding liquid foods. Due to PLA's properties, printed parts should not be exposed to temperatures above 60°C. For detailed guidance, please refer to the PLA Pure Advanced Printing Guide on the Bambu Lab Wiki.

Bambu PLA Pure is developed specifically for FDM 3D printing with a focus on both emission safety and contact safety. When used with the standard profile, it delivers excellent print quality and supports contact-safe performance. As actual use may vary depending on the environment, conditions, and workflows, applications with higher requirements for contact safety should follow additional guidance.

For more details, please refer to the official Bambu Lab Wiki.

2. Accessory Compatibility

Compatible with all printers, AMS, build plates, and nozzles.

For contact-safe finished parts, it is not recommended to use Bambu Liquid Glue or Solid Glue.
(Improved adhesion to the print bed can alternatively be achieved by increasing the bed temperature.)

3. Drying Recommendations

Dry before use to ensure the best print quality and consistent finish. Store in a dry environment after use. For more details, refer to the filament drying guide on the WIKI.

4. Refill

Refill filament must be used with a spool. For detailed instructions on how to change filament using the Bambu reusable spool, see the guide on the WIKI.

5. Important Notice

While this product has passed food contact compliance tests at both raw material and print sample levels, 3D printing is a process with many variables. The quality and safety of finished prints depend on factors such as equipment, printing environment, work procedures, and post-processing.

Bambu Lab's responsibility is limited to the compliance and quality of the filament material itself. Bambu Lab makes no express or implied warranties regarding the safety, suitability, or regulatory compliance of user-generated prints for food contact.

Bambu Lab does not guarantee that such user-produced prints comply with applicable food contact regulations, standards, or certification requirements in any jurisdiction, and cannot be held liable for direct or indirect losses, claims, or liabilities resulting from their use.