BUY NOW AND GET FREE DELIVERY On all orders over 500,- (gælder kun DK)
1-2 DELIVERY DAYS Order before 12AM and we send the order the same day.
14 DAYS RIGHT OF WITHDRAWAL
Skip to product information
1 of 2

Colorfabb

Colorfabb nGen_FLEX - Co-Polyester filament

Colorfabb nGen_FLEX - Co-Polyester filament

Campaign ending in
00D : 00H : 00M : 00S
Regular price 189,00 DKK
Regular price 219,00 DKK Sale price 189,00 DKK
Save 13% Sold out
Tax included. Shipping calculated at checkout.

20+ in stock : 1-2 weekdays

e-maerket
  • Dankort
  • Visa
  • Mastercard
  • Klarna
  • MobilePay
  • EAN EAN
Delivery truck icon

Fri fragt til pakkeshop ved køb over 500,-

Location marker icon

Sendes fra Roskilde DK

Service icon

Lokalt servicecenter i Roskilde

Warranty icon

1 års garanti

Kundeservice

Email:      hello@3dsaga.com
Telefon:  +45 69 15 31 11
Alle hverdage fra 10.00 - 13.00

Showroom:
Mandag - torsdag:  09.30 – 15.30
Fredag:                    09.30 – 15.00

View full details

Colorfabb nGen_FLEX - Co-Polyester filament

1.75mm 650g

nGen_FLEX can best be described as a semi-flexible filament with a shore hardness of 95A. It can be fed through a Bowden system and printed at normal speeds.

The material is temperature resistant up to approx. 125 °C, meaning printed parts can be steam sterilized at 121 °C.

For functional parts that need to be discreet or not attract attention, nGen_FLEX Black is the obvious choice.

Features

Easy to print
Meets FDA requirements for food contact.

(Note that local EU regulations may vary.)


Specifications

Material:
colorFabb nGen_FLEX

Diameter tolerance:
± 0.1 mm

Density:
1.13 g/cm³

Glass transition temperature:
130 °C

Printing Tips

colorFabb has a well-equipped 3D printing studio with a wide range of popular 3D printers.
Their materials are tested across various printers, and based on this, they have developed the following recommendations for using colorFabb filament.

Recommended print temperature:
240–260 °C

Recommended print speed:
40–60 mm/s

Recommended heated print bed:
80 °C + BuildTak

Cooling fan:
nGen_FLEX yields the best results on a BuildTak-covered print bed heated to about 80 °C. Ensure that the distance between the nozzle and the print bed is not too small – the first layer should not be overly compressed.

 

Downloads

Filament TDS

Filament SDS (Danish)

Filament SDS (English)

 

Some of the product information shown here is generated by AI and may be incomplete or incorrect. Always check the manufacturer's own documentation before relying on it.
Material
Material Type
Co-Polyester (semi-flexible)
Shore A Hardness
95
Printing
Print Speed
Regular speeds (comparable to non-flexible filaments)
Bowden Tube Compatible
Yes
Compatibility
Compatible Materials
Amphora grade co-polyester materials (suitable for dual extrusion)
Thermal Properties
Heat Resistance
~130C
Steam Sterilization Temperature
121C
Filament Dimensions
Available Diameters
1.75mm2.85mm