Hyper ABS 1.75mm 3D Printing Filament 1kg

• Five times faster, more efficient

• High impact strength to print stronger models

• Reduces shrinkage rate – no need to close the chamber during printing

• Heat resistant to meet multiple environmental requirements

• Safer and more environmentally friendly – ​​lower residual monomer content in materials

• Highly compatible with Creality 3D printers

Five times faster, more efficient
By increasing flowability, Hyper ABS makes 3D printing faster and more efficient, allowing you to create more items at the same time.

High impact strength
Hyper ABS has an impact strength of 19 kJ/m² – almost double PLA's 10 kJ/m². The printed models are stronger than PLA's and better suited for parts used in harsh environments.

Makes 3D printing much easier
Reduces shrinkage rate. No need to close the chamber during printing. Avoid cracks and deformation.

Heat resistance
Hyper ABS has a heat distortion temperature of 80°C, which is 25°C higher than regular PLA, making it suitable for use in environments with higher temperature requirements.

Safer and more environmentally friendly
Hyper ABS is made from materials with lower residual monomer content and is formulated and produced to reduce emissions from thermal decomposition to protect your health.

Compatible with most Creality 3D printers

Application

Highly compatible with Creality 3D printers
Continuous testing of printers and filament as well as adjustments ensure high adaptability.

Made from high quality materials
Carefully selected raw materials from around the world and strict quality control ensure excellent printing performance and results.

Share model library on Creality Cloud
Access over 300,000 models on Creality Cloud. Free modeling, online slicing & printing, and community sharing.

Hyper ABS 3D printing filament

• Extruder temperature: 230–270 °C

• Heated bed temperature: 75–95 °C

• Impact strength: 19 kJ/m²

• Tensile strength: 30.4 ± 0.6 MPa

• Bending strength: 48.1 ± 0.2 MPa

• Filament diameter: 1.75 ± 0.05 mm