Colorfabb XT

1.75mm 750g

colorFabb XT is an engineering-grade functional 3D printing filament, based on Eastman Chemical Amphora 3D Polymer. Strong and distinctive, colorFabb_XT Black gives every print a powerful expression. The glossy surface also provides an elegant and exclusive look.

• FDA approved for food contact
• Low odor during printing
• High toughness and strength

Specifications

Material: colorFabb_XT CO-POLYESTER
Diameter tolerance: ± 0.05 mm
Density: 1.27 g/cm³
Continuous operating temperature: 75 °C

Printing recommendations from colorFabb

Since colorFabb develops and produces their filaments in-house, they have extensive expertise in materials. Here you will find useful material specifications to help you choose the right material for your project.

Recommended print temperature: 240–260 °C
Recommended print speed: 40–70 mm/s
Recommended heated bed: 60–70 °C

Build plate

For colorFabb_XT Black, printing on a heated build plate is recommended. After printing, the build plate should cool down to approximately 20–30 °C before removing the printed part.

Downloads

Filament TDS

Filament SDS