Original Prusa XL Single-Tool to Five-Head Upgrade

The Original Prusa XL is designed with easy upgrades in mind. Install one of the upgrade packages to increase the number of available tool heads and expand your 3D printing capabilities.

With a tool changer in place and multiple tool heads, you can pre-load different filaments and combine them in a single print. With smart object designs, you can minimize the number of supports and even print without any waste at all – no wipe tower, no filament scraps around the printer. Say goodbye to plastic waste heavier than the primary printed object!

The combination of multiple filaments allows you to save valuable material – for example, you can print the main object from PCCF filament and the supports from PLA, which yields significant cost savings!

Package contents

1-Tool Head to 5-Tool Head Upgrade

•  1x XL Single-Tool Nextruder upgrade
• Includes 0.4mm nozzle (for existing Nextruder)
• 4x XL Multi-Tool Nextruder (with 0.4 nozzle)
• Includes spool holder and Prusa Nextruder sock
• 1x XL electronic expansion kit
• XLSplitter board
• Additional power supply
• 2x additional 0.4mm nozzles

2-Tool Head to 5-Tool Head Upgrade

•  3x XL Multi-Tool Nextruder (with 0.4 nozzle)
• Includes spool holder and Prusa Nextruder sock
• 1x XL electronic expansion kit
• XLSplitter board
• Additional power supply
• 2x 0.4mm nozzle (for existing Nextruder)

1-Tool Head to 2-Tool Head Upgrade

•  XL Single-Tool Nextruder upgrade
• Includes 0.4mm nozzle (for existing Nextruder)
• XL Multi-Tool Nextruder
• Tool changer

Tools required for assembly

To upgrade the XL with additional print heads, you will need a set of tools. See the list below. If you already have these tools at home (they are all part of the Original Prusa XL package), you do not need to purchase them again.
XL tools
wrenches

•  Mini wrench - used for dock calibration. It can be replaced with a small flat screwdriver
• Uni wrench - used for dock calibration
• PH2 screwdriver - required for terminal screws, a standard PH2 screwdriver
• Needle-nose pliers
• T10 wrench - at least 71 mm long
• 2.5 mm Allen key - at least 86 mm long, as thin as possible due to space constraints
• 3.0 mm Allen key - at least 128 mm long