BUY NOW AND GET FREE SHIPPING For purchases over 500,- (only valid in DK)
1-2 DELIVERY DAYS Order before 12 noon and we will ship the same business day
14 DAY RETURN RIGHT
1 16

Anycubic

Anycubic Bio Resin

Anycubic Bio Resin

Ingen ekspertanmeldelser tilgjengelig
Kampagne slutter om
00D : 00T : 00M : 00S
177,57 DKK
177,57 DKK 177,57 DKK
Rabatt 0% Utsolgt
Avgift inkludert. Frakt beregnes ved kassen.

10+ på lager : 1-2 virkedager

Trustpilot
e-maerket
  • Dankort
  • Visa
  • Mastercard
  • Klarna
  • American Express
  • MobilePay
Delivery truck icon

Gratis frakt på bestillinger over 500,- i DK

Location marker icon

Skip fra Taastrup DK

Warranty icon

1 års garanti

Service icon

Lokalt servicesenter

Vis alle detaljer


Printer model Layer thickness Normal Exposure Time Break Time Bottom Exposure time Bottom layer Anti-aliasing Z-Lift Distance Z-Lift Speed Z-Retract Speed
Photon Mono M7 Max 0.05mm 2 seconds 0.5 seconds 30 seconds 5 1 8mm 6 mm/s 6 mm/s
Photon Mono M7 0.05mm 2.2 seconds 1 sec 35 seconds 4 1 8mm 6 mm/s 6 mm/s
Photon Mono 4 0.05mm 2.8 seconds 1 sec 30 seconds 5 1 6mm 4 mm/s 6 mm/s
Photon Mono 4 Ultra 0.05mm 2.6 seconds 1 sec 30 seconds 5 1 5mm 8 mm/s 8 mm/s
Photon Mono M7 Pro 0.05mm 1.7 seconds 2 seconds 35 seconds 5 1 8mm 6 mm/s 6 mm/s
Photon Mono M5s Pro 0.05mm 3.2 seconds 1 sec 35 seconds 6 1 8mm 6 mm/s 6 mm/s
Photon Mono M5 0.05mm 2.8 seconds 1 sec 35 seconds 6 1 8mm 5 mm/s 6 mm/s
Photon Mono M5s 0.05mm 2.8 seconds 1 sec 35 seconds 6 1 8mm 5 mm/s 6 mm/s
Photon Mono X 6Ks 0.05mm 2.5 seconds 1 sec 20 seconds 6 1 8mm 3 mm/s 4 mm/s
Photon Mono 2 0.05mm 2.5 seconds 1 sec 25 seconds 6 1 6mm 4 mm/s 6 mm/s
Photon X 6K 0.05mm 2 seconds 1 sec 30 seconds 6 1 8mm 2 mm/s 3 mm/s
Photon Mono M3 Max 0.05mm 3 seconds 2 seconds 35 seconds 6 1 10mm 4 mm/s 4 mm/s
Photon Mono D2 0.05mm 2.5 seconds 1 sec 28 seconds 5 1 5mm 2 mm/s 3 mm/s
Photon M3 Premium 0.05mm 2.5 seconds 1 sec 35 seconds 5 1 8mm 6 mm/s 6 mm/s
Photon Mono X2 0.05mm 2.5 seconds 1 sec 25 seconds 5 1 8mm 4 mm/s 4 mm/s
Photon Mono X 0.05mm 2 seconds 1 sec 28 seconds 6 1 8mm 4 mm/s 4 mm/s
Photon Mono 4K 0.05mm 2 seconds 1 sec 40 seconds 6 1 6mm 4 mm/s 6 mm/s
Photon M3 0.05mm 2 seconds 1 sec 28 seconds 5 1 6mm 3 mm/s 4 mm/s
Photon M3 Plus 0.05mm 1.5 seconds 1 sec 28 seconds 6 1 6mm 6 mm/s 6 mm/s

Color selection

Instructions for use for Anycubic UV Resin

Before use:

  1. Shake the resin bottle well to mix pigments and ingredients.

  2. Clean the resin container and print platform thoroughly to ensure optimal light penetration into the bottom of the resin container.

During use:

  1. Unscrew the lid and pour resin into the resin container according to your printer's recommendations.

  2. Select the correct print parameters in your 3D printer software and start printing.

After printing:

  1. Use appropriate tools for finishing: sharp knife, pliers, tweezers, gloves and containers for cleaning.

  2. Clean the model thoroughly with ≥95% ethanol, isopropyl alcohol, or another suitable cleaning fluid.

  3. Rinse the model or use an ultrasonic cleaner for best results.

  4. Feel free to use Anycubic Wash & Cure machines for optimal finishing.

  5. Remove any supports and perform further processing such as polishing and painting.

Wastewater management:

  • Do not discharge used resin liquid into the sewer to avoid contamination of groundwater.

  • Heat the wastewater to evaporate the water, and dispose of the remaining material after curing with a curing machine or by sunlight.

Important Precautions

  1. Store uncured resin in a cool, dark place at room temperature (protect from direct sunlight and high temperatures).

  2. Recommended printing temperature is 18-35°C. At lower temperatures it may be necessary to preheat the resin (not above 60°C).

  3. If pigments have settled, shake or stir resin thoroughly before use.

  4. Remove the model quickly after cleaning to avoid prolonged soaking in liquid.

  5. After cleaning and drying, the model should be post-cured to ensure optimal mechanical properties.

  6. Control light intensity and time during post-curing for best results:

    • Use a mercury lamp or LED light source with an intensity of 5-10 mW/m² for a maximum of 1 hour.

    • Sunlight exposure is recommended for approximately 1 hour (summer conditions).

    • Avoid prolonged exposure to strong light sources such as high-pressure lamps.

  7. Preferably print in a dark room or with the resin container covered, as resin is photosensitive.

  8. When using high-clear resin, the curing time should be halved to avoid yellowish discoloration.

  9. Black resin can become partially transparent at thicknesses below 0.5 mm – thicker walls give better color effect.

Note: Material properties may vary depending on printer, finishing and testing equipment. For safety information, please refer to the product MSDS. If you have any questions or concerns, please feel free to contact us.