Product features
- 5-inch touchscreen
- AI error detection
- Automatic flow dynamic calibration
- Multi-color printing
- Cooling with cold air
- Active venting and drying of filament
- 256 × 256 × 256 mm³ print space
The icon, reimagined
What Makes the P Series Iconic?
Highlights
Smartphone-Level User Experience
The P2S model features a fully upgraded touchscreen and a powerful processor running our new, intuitive second-generation user interface. Experience smoother interactions, richer graphics, and clear step-by-step instructions.
5-inch Touchscreen ｜ 2nd generation UI
70% More Extrusion Force & Real-Time Error Detection
The PMSM servo extruder delivers up to 8.5 kg of maximum extrusion force — 70% more than its predecessor — and significantly improves stability at high flow rates. Our proprietary servo architecture measures resistance and position at 20 kHz and actively detects filament slip and clogs in real time.
PMSM Servo Architecture ｜ DynaSense Extruder
Print Smoothly In Every Corner – Every Time.
P2S uses a high-resolution, high-frequency eddy current sensor to calibrate the flow dynamics. Intelligent algorithms actively adjust the flow rate based on the measurements, ensuring precise and consistent extrusion on every layer and in every corner.
Active Flow Rate Compensation ｜ Eddy Current Pressure Sensor
Adaptive Airflow System
Perfect Overhangs Regardless of Filament or Temperature.
Unlike traditional cooling systems that recycle hot air, the P2S' Adaptive Airflow System draws in cold air directly from the outside. This significantly increases cooling efficiency and allows you to print low-temperature filaments with the door closed – without worrying about overhang quality or nozzle clogging.
Cold air intake｜Cooling mode
Adaptive Airflow System
50°C Chamber – Ready for Engineering Grade Filaments.
The P2S features a damper-controlled Adaptive Airflow System that effectively retains heat in the chamber while actively filtering the internal air through a high-performance carbon filter. This allows you to print demanding, technical filaments with a risk of warping – while maintaining clean and safe air quality in your workspace.
Heat preservation｜Carbon filter
Peace of mind, every time you print.
P2S introduces advanced AI computer vision that actively detects common printing errors such as “spaghetti” draw-offs and nozzle clogs. The system also checks your startup settings to ensure a safe and accurate start of each print job.
AI error detection ｜ 2 TOPS NPU
Nozzle Replacement In 30 Seconds.
The P2S features a quick-change hotend design with a simple one-clip mechanism that releases the entire nozzle and heat sink assembly – without disconnecting any cables. This significantly reduces nozzle replacement time and eliminates the risk of wiring errors.
Quick-change Hotend ｜ 1-clip Design
Liveview Without Delay & Time Lapse In High Quality.
Enhanced LED lighting significantly increases clarity in both live view and time-lapse videos. Combined with a high-speed camera and dual-band Wi-Fi, you can easily monitor your printer remotely and capture beautifully lit time-lapses that are perfect for sharing on social media.
“Stage” lighting ｜ 1080P high-speed camera
Reliable for printing with fiber-reinforced materials.
The P2S extrusion system and nozzle are made of hardened steel, providing exceptional durability and wear resistance. The system is designed specifically for stable and long-lasting printing with high-performance, fiber-reinforced materials.
Hardened Steel Die｜Hardened Steel Extruder Wheel
AMS 2 Pro
Multi-Color Printing & Filament Drying – All In One Unit.
Experience our most reliable multi-color printing system yet. The AMS 2 Pro features an improved design for an even better user experience and finally introduces the long-awaited filament drying. A groundbreaking active venting system dries filament 30% faster than traditional sealed heating systems and maintains low humidity for optimal storage and print quality.
Automatic Venting For Filament Drying ｜ Multi-Color Printing
Electromagnetic Air Valve
Automatic venting enables efficient dehumidification during drying and airtight sealing ensures print quality for weeks.
Faster multi-color printing
The PMSM feed motor increases filament feeding by 60%, saving an average of 10 minutes for every 100 filament changes.
Over One Million High-Quality Models Ready to Print.
Perfection, Detail By Detail.
P2S features several improvements that elevate the user experience. While these small adjustments are not always immediately visible, they reflect the level of perfection that Bambu Lab constantly strives for.
P2S Specs
| Point
|
Specification
|
| Printing technology
|
Fused Deposition Modeling (FDM) |
| Construction volume (W×D×H)
|
256 × 256 × 256 mm³ |
| Chassis
|
Plastic and steel |
| Outer frame
|
Plastic and glass |
| Physical dimensions (printer)
|
392 × 406 × 478 mm³ |
| Package size
|
490 × 490 × 560 mm³ |
| Weight (P2S)
|
Net weight: 15.0 kg │ Gross weight: 18.58 kg |
| Weight (P2S Combo, incl. AMS 2 Pro)
|
Net weight: 16.4 kg │ Gross weight: 21.33 kg |
| Extruder wheel
|
Hardened steel |
| Nozzle
|
Hardened steel |
| Max. nozzle temperature
|
300°C |
| Included nozzle diameter
|
0.4mm |
| Supported nozzle diameters
|
0.2mm, 0.4mm, 0.6mm, 0.8mm |
| Filament cutter
|
Built-in |
| Filament diameter
|
1.75mm |
| Extruder motor
|
Bambu Lab high-precision permanent magnet synchronous motor |
| Build plate material
|
Flexible steel plate |
*To ensure that the heating plate quickly reaches the required temperature (35-110℃), the printer will maintain maximum power for approximately 3-5 minutes.
What is included in the package?
Frequently Asked Questions (FAQ)
-
What material are the P2S' pre-installed extruder wheels and nozzles made of?
Hardened steel.
-
Does the P2S require an external power supply to use the dry filament feature when connected to the AMS 2 Pro?
Connect the printer to a single AMS 2 Pro with a 6-pin cable to use the drying function when the entire device is in standby mode. During drying, printing-related functions will be paused. If you want to dry filaments in multiple AMS 2 Pro devices simultaneously, you will need to purchase additional official Bambu Lab power supplies to power the remaining AMS 2 Pro devices.
Power supply parameters:
-
Is the P2S buildplate compatible with the XPA series buildplates?
The P2S buildplate has an optimized recognition function. Older buildplates do not support the type recognition function, but their external dimensions are the same, so they can still be used for printing.
-
The left side of the P2S has some mounting points. Can an additional subcooling fan be installed?
You can purchase an official additional cooling fan for upgrade.
-
Can P2S use the nozzle from A1 and H2D?
It is compatible with H2D nozzles, but not with A1 nozzles.
-
How many AMS devices can P2S connect to at most?
It supports connecting 4 AMS 2 Pro units and 4 AMS HT units, a total of 8 AMS units with 20 slots. This means it supports up to 20-color printing.
-
Does P2S support chamber temperature control and how is the temperature controlled?
The P2S does not have active chamber heating, but it can regulate the chamber temperature via its closed chamber and automatic switching flap between internal and external air circulation.
-
Why did P2S stop using carbon bars?
To make maintenance easier. Dirt residue is much easier to clean on the surface of a smooth rod.
