Read more about the products below or on the products page.

"Kobra S1 Combo is a great machine for the price. Fast printing - Multiple materials at the same time - Active filament drying while printing - and with support for up to 8 colors, the Kobra S1 Combo is a really cool machine, and it's a CORE XY!" - 3DSaga

With Anycubic's ACE PRO device you can easily print with multiple colors or even multiple materials. You can print in PLA but use PETG as a support material. By activating filament backup you can easily empty your half-empty spools, simply set all the filaments to the same color and the ACE PRO will automatically switch when the spool is empty = ZERO WASTE*

The Kobra S1 Combo can print a complete Benchy in just 15 minutes!

• Recommended print speed 300mm/s
• Max print speed 600mm/s
• Max Acceleration: 20,000mm/s2

With a quick release hotend you can easily switch between different sizes of nozzles or easily perform a repair.

The hotend can reach temperatures up to 320℃ and comes with a standard 0.4mm brass hotend. The high temperature allows you to print in everything from PLA to more complex materials like ABS or ASA.

With support from Anycubic we can offer several types of nozzles from 0.2 all the way up to 0.8mm. Which can give better resolution with a 0.2mm nozzle or print much faster with a 0.8mm nozzle

You can easily bet on your Kobra S1 Combo!

With spaghetti detection with AI camera, timing belt tension and power-loss resume, you can safely and easily set your 3D printer to print overnight without worry.

With a respectable print area of ​​250x250x250mm, the only limit is your imagination. If you need to print something larger, you can use Anycubic slicer next to make cuts and halve your models so they fit into the print area of ​​the Kobra S1 Combo.

SKIP ITEMS!

Anycubic has added a long-awaited feature, namely skip part, which means that if one of your prints fails you can cancel only the failed part and you don't have to stop your entire print. This way you can save filament, time and money!

*Zero waste will not be 100% possible as the printer still has to purge the rest of the filament in the hot end.

+

Anycubic PLA Basic

RFID Filament – ​​Improved Smart Printing
Anycubic Color Engine Pro accurately detects RFID filaments and automatically optimizes printer settings for the best results. No more time-consuming and complicated setup – ensuring precise execution of every print job and minimizing filament waste. Just load the filament and start printing!

Uniform filament diameter
We offer ±0.02 mm precision and highly consistent colors in our filaments to ensure high-quality 3D printing.

Environmentally friendly
PLA is made from lactic acid, which is produced through starch fermentation during wet milling of corn (or other plants). It is a biodegradable and environmentally friendly material.

Compatible printers
Compatible with virtually all FDM 3D printers on the market.