Anycubic Wash and Cure 3

Larger Size for Enhanced Capacity

Compared to the Anycubic Wash & Cure 2.0, the Anycubic Wash & Cure 3 impressively increases the cleaning basket capacity by 100%, now at 3 liters. The overall volume of the cleaning bucket has been expanded to 4 liters. This makes it perfectly suited for LCD 3D printers with a size of 7.3 inches or less.

The curing size has been increased by 15%, up to 160*180 millimeters, to accommodate larger and more models for single post-processing sessions.

Localized Strengthening, Uniform Curing.

The "Innovative Flexicure Gooseneck Lamp Design" boosts the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas like the top of models and the edge of garment pieces.

By adopting an all-new arrangement of light beads and lens light source, the curing uniformity of Anycubic Wash & Cure 3 has been improved by 20% compared to its predecessor 2.0. This results in more thorough and comprehensive curing of the entire model.

Double-Layer Design, IPA Saving.

The double-layer PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights of 100mm and 165mm, providing flexibility to accommodate print platforms ranging from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA consumption.

Simple Operation, Quiet and Efficient.

Dual-mode cleaning and curing, easily selected with a single click; Enhanced gooseneck light curing mode can be easily toggled on and off with a single click. Infinite knob control, adjustable from 1 to 30 minutes as needed.

Through a more tightly structured design and software optimization, the noise interference generated during cleaning and curing is reduced, creating a quieter and more pleasant working environment.

Measured by Anycubic Laboratory, the maximum noise level is <65 dB in the machine's operating state.