BUY NOW AND GET FREE SHIPPING
For purchases over 500,- (only valid in DK)
1-2 DELIVERY DAYS
Order before 12 noon and we will ship the same business day
14 DAY RETURN RIGHT
Lav lagerbeholdning: 10 igjen : 1-2 virkedager
Kunne ikke laste inn hentetilgjengelighet
Gratis frakt på bestillinger over 500,- i DK
Skip fra Taastrup DK
1 års garanti
Lokalt servicesenter
Bambu Lab PLA Glow
1.75mm 1kg
Product features
-
Unique glow in low light
-
Comes with basic reusable spool
-
Diameter: 1.75mm +/- 0.03mm
Warnings when using
-
A hardened steel nozzle is required when printing
-
Stainless steel nozzles of all sizes are NOT compatible
-
All 0.2mm nozzles are NOT compatible
-
Compatible with AMS, but may cause faster wear
-
AMS Lite NOT compatible
Bamboo PLA Glow
PLA Glow stands out with its unique addition: luminescent powder. This variant retains the well-known qualities of traditional PLA, including easy printing, high quality and excellent mechanical properties. What sets PLA Glow apart is its special feature – it glows in the dark. This makes it the ideal choice for producing luminous nameplates, logos, jewelry and various models that require a captivating glow effect.
Unique luminescent effect in the dark
Bambu PLA Glow contains a special additive: luminous powder , which gives printed objects a unique property – they emit a captivating glow in the dark.
Compatibility with accessories
| Accessories | Recommended | Not recommended |
|---|---|---|
| Building board | Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate | / |
| Hotend | Hotend with hardened steel nozzle 0.4 mm / 0.6 mm / 0.8 mm | Hotend with stainless steel nozzle |
| Glue | Bamboo Liquid Glue / Glue Stick | / |
| AMS & AMS Lite | AMS | AMS Lite* |
- It is not recommended to print Bambu PLA Glow and other luminescent PLA filaments with AMS Lite . These filaments are hard and rough, which can cause clogging or filament feeding problems due to high resistance.
PLA Glow Hex Code Table
| Color | Hex Code | Display |
| Glow Green | #A1FFAC | |
| Glow Yellow | #F8FF80 | |
| Glow Pink | #F17B8F | |
| Glow Blue | #7AC0E9 | |
| Glow Orange | #FF9D5B |
*The hex code indicates the daytime color of PLA Glow .
RFID for intelligent printing
All print parameters are embedded in RFID and can be read via our AMS (Automatic Material System) .
Paste and print – no complicated setup steps!
Recommended print settings
| Parameters | Value |
|---|---|
| Drying settings (hot air drying oven) | 55°C, 8 hours |
| Humidity during printing and storage | < 20% RH (sealed, with desiccant) |
| Nozzle temperature | 190–230 °C |
| Building board temperature (with glue) | 35–45°C |
| Print speed | < 250 mm/s |
Physical properties
| Property | Value |
|---|---|
| Density | 1.26 g/cm³ |
| Vicat softening temperature | 56 °C |
| Heat deflection temperature | 55 °C |
| Melting temperature | 155 °C |
| Melting index | 23.3 ± 2.4 g/10 min |
Mechanical properties
| Property | Value |
|---|---|
| Tensile strength | 32 ± 3 MPa |
| Elongation at break | 8.6 ± 1.2% |
| Flexural modulus | 2640 ± 130 MPa |
| Bending strength | 76 ± 4 MPa |
| Impact strength | 27.3 ± 2.2 kJ/m² |
Downloads
Printing tips
• Drying conditions: 55°C for 8 hours. Store in a dry environment after use. Dry the material before use if it has absorbed moisture.
For more details, refer to: Filament drying guide on WIKI .
• It is not recommended to use a 0.2 mm nozzle . For optimal results, use a 0.4 mm nozzle instead.
• The model's brightness will fade over time , but short-term exposure (about 2 hours) to ultraviolet light or sunlight can revive the glow. However, prolonged or frequent exposure can accelerate the aging of the PLA.
• Not suitable for AMS Lite: Using AMS Lite may result in high filament resistance and increased risk of feeding problems. Consider alternative methods, such as drying before use, for better results.
Contents of the box
