BUY NOW AND GET FREE DELIVERY
On all orders over 500,- (gælder kun DK)
1-2 DELIVERY DAYS
Order before 12AM and we send the order the same day.
14 DAYS RIGHT OF WITHDRAWAL
Kunne ikke laste inn hentetilgjengelighet
20+ på lager : 1-2 virkedager
Fri fragt til pakkeshop ved køb over 500,-
Sendes fra Roskilde DK
Lokalt servicecenter i Roskilde
1 års garanti
Kundeservice
Email: hello@3dsaga.com
Telefon: +45 69 15 31 11
Alle hverdage fra 10.00 - 15.00
Showroom:
Mandag - torsdag: 09.30 – 15.30
Fredag: 09.30 – 15.00
Colorfabb PA-CF low warp
1.75mm 700g
PA-CF Low Warp is a special type of polyamide filament designed to minimize warping during printing – even without a heated print bed.
Prints with low infill remain flat, even on a cold print bed. For higher infill, 40–50°C is enough to achieve a nice and stable result.
Properties
- High tensile strength
- High temperature resistance
- Reinforced with carbon fiber
Specifications
Material:
ColorFabb PA-CF Low Warp
Diameter tolerance:
± 0.1 mm
Density:
1.4 g/cm³
Max. continuous operating temperature:
120 °C
Print tips
Their PA material has been tested across different printers, forming the basis for the following recommended settings.
Recommended print temperature:
260–280 °C
Recommended print speed:
30–40 mm/s
Recommended heated print bed:
Room temperature – 50 °C
When printing on a glass plate, it may be advisable to use 3DLac for better adhesion.
Cooling fan:
50% fan speed is a good starting point and yields good results for overhangs and small details.
For the best possible mechanical strength, it is recommended to print with as little cooling as possible for optimal layer adhesion.