BUY NOW AND GET FREE DELIVERY On all orders over 500,- (gælder kun DK)
1-2 DELIVERY DAYS Order before 12AM and we send the order the same day.
14 DAYS RIGHT OF WITHDRAWAL
Hopp til produktinformasjon
1 av 7

Bambu Lab

Bamboo Reusable Spool

Bamboo Reusable Spool

Kampagne slutter om
00D : 00T : 00M : 00S
Vanlig pris 98,21 DKK
Salgspris 98,21 DKK
Rabatt 16% Utsolgt
Avgift inkludert. Frakt beregnes ved kassen.

18 på lager : 1-2 virkedager

e-maerket
  • Dankort
  • Visa
  • Mastercard
  • Klarna
  • MobilePay
  • EAN EAN
Delivery truck icon

Fri fragt til pakkeshop ved køb over 500,-

Location marker icon

Sendes fra Roskilde DK

Service icon

Lokalt servicecenter i Roskilde

Warranty icon

1 års garanti

Kundeservice

Email:      hello@3dsaga.com
Telefon:  +45 69 15 31 11
Alle hverdage fra 10.00 - 13.00

Showroom:
Mandag - torsdag:  09.30 – 15.30
Fredag:                    09.30 – 15.00

Vis alle detaljer

Bamboo Reusable Spool

Specifications

Property Low temperature (≤70℃) High temperature (≤90℃)
Materials ABS ABS+PC
Package size 200 × 200 × 67mm 200 × 200 × 67mm
Weight 250g 250g
Color White Black
Filament compatibility PLA, PETG PLA, PETG, ABS, ASA, PA6-GF, ABS-GF, PAHT-CF, PET-CF, PA6-CF, PC, TPU

Printed coil instructions

[Insert any specific instructions regarding handling, storage, and use of the filament spool here.]

Filament spool handling assembly instructions

When you are finished printing, you will have the following parts:

  • Wide piece (1x)

  • Narrow piece (1x)

  • Spacers (2x)

Find the locator (a small block on the wide piece). Align it with the notch on the inner ring of the filament spool. Insert the wide piece into the filament spool.

Mounting the narrow piece:

  • Step 1: Insert the narrow piece and align the groove on each piece inside the coil until it is pressed firmly against the wide piece.

  • Step 2: Once pressed in place, turn the narrow piece clockwise until it slides into place and you hear it click/lock.

Mounting of spacers:

  • Step 1: Make sure the spacer is installed inside the coil (under the triangle).

  • Step 2: Tear the plastic strips apart and pull them out.

Read more about replacing filament with Bambu reusable spool on Wiki: Click here.