BUY NOW AND GET FREE DELIVERY On all orders over 500,- (gælder kun DK)
1-2 DELIVERY DAYS Order before 12AM and we send the order the same day.
14 DAYS RIGHT OF WITHDRAWAL
Hopp til produktinformasjon
1 av 2

Colorfabb

Colorfabb nGen_FLEX - Co-Polyester filament

Colorfabb nGen_FLEX - Co-Polyester filament

Kampagne slutter om
00D : 00T : 00M : 00S
Vanlig pris 187,49 DKK
Vanlig pris 217,25 DKK Salgspris 187,49 DKK
Rabatt 13% Utsolgt
Avgift inkludert. Frakt beregnes ved kassen.

20+ på lager : 1-2 virkedager

e-maerket
  • Dankort
  • Visa
  • Mastercard
  • Klarna
  • MobilePay
  • EAN EAN
Delivery truck icon

Fri fragt til pakkeshop ved køb over 500,-

Location marker icon

Sendes fra Roskilde DK

Service icon

Lokalt servicecenter i Roskilde

Warranty icon

1 års garanti

Kundeservice

Email:      hello@3dsaga.com
Telefon:  +45 69 15 31 11
Alle hverdage fra 10.00 - 13.00

Showroom:
Mandag - torsdag:  09.30 – 15.30
Fredag:                    09.30 – 15.00

Vis alle detaljer

Colorfabb nGen_FLEX - Co-Polyester filament

1.75mm 650g

nGen_FLEX can best be described as a semi-flexible filament with a shore hardness of 95A. It can be fed through a Bowden system and printed at normal speeds.

The material is temperature resistant up to approx. 125 °C, meaning printed parts can be steam sterilized at 121 °C.

For functional parts that need to be discreet or not attract attention, nGen_FLEX Black is the obvious choice.

Features

Easy to print
Meets FDA requirements for food contact.

(Note that local EU regulations may vary.)


Specifications

Material:
colorFabb nGen_FLEX

Diameter tolerance:
± 0.1 mm

Density:
1.13 g/cm³

Glass transition temperature:
130 °C

Printing Tips

colorFabb has a well-equipped 3D printing studio with a wide range of popular 3D printers.
Their materials are tested across various printers, and based on this, they have developed the following recommendations for using colorFabb filament.

Recommended print temperature:
240–260 °C

Recommended print speed:
40–60 mm/s

Recommended heated print bed:
80 °C + BuildTak

Cooling fan:
nGen_FLEX yields the best results on a BuildTak-covered print bed heated to about 80 °C. Ensure that the distance between the nozzle and the print bed is not too small – the first layer should not be overly compressed.

 

Downloads

Filament TDS

Filament SDS (Danish)

Filament SDS (English)

 

Noe av produktinformasjonen som vises her, er generert av AI og kan være ufullstendig eller feil. Kontroller alltid produsentens egen dokumentasjon før du stoler på den.
Material
Material Type
Co-Polyester (semi-flexible)
Shore A Hardness
95
Printing
Print Speed
Regular speeds (comparable to non-flexible filaments)
Bowden Tube Compatible
Yes
Compatibility
Compatible Materials
Amphora grade co-polyester materials (suitable for dual extrusion)
Thermal Properties
Heat Resistance
~130C
Steam Sterilization Temperature
121C
Filament Dimensions
Available Diameters
1.75mm2.85mm