BUY NOW AND GET FREE SHIPPING
On all orders over 500,- (DK only)
1-2 DELIVERY DAYS
Order before 12 noon and we will ship the same business day
14 DAY RETURN RIGHT
Kunne ikke laste inn hentetilgjengelighet
20+ på lager : 1-2 virkedager
Customer Service
Email: hello@3dsaga.com
Phone: +45 69 15 31 11
All weekdays from 10:00 - 15:00
Showroom:
Monday - Thursday: 09:30 – 15:30
Friday: 09:30 – 15:00
Colorfabb PA-CF low warp
1.75mm 700g
PA-CF Low Warp is a special type of polyamide filament designed to minimize warping during printing – even without a heated print bed.
Prints with low infill remain flat, even on a cold print bed. For higher infill, 40–50°C is enough to achieve a nice and stable result.
Properties
- High tensile strength
- High temperature resistance
- Reinforced with carbon fiber
Specifications
Material:
ColorFabb PA-CF Low Warp
Diameter tolerance:
± 0.1 mm
Density:
1.4 g/cm³
Max. continuous operating temperature:
120 °C
Print tips
Their PA material has been tested across different printers, forming the basis for the following recommended settings.
Recommended print temperature:
260–280 °C
Recommended print speed:
30–40 mm/s
Recommended heated print bed:
Room temperature – 50 °C
When printing on a glass plate, it may be advisable to use 3DLac for better adhesion.
Cooling fan:
50% fan speed is a good starting point and yields good results for overhangs and small details.
For the best possible mechanical strength, it is recommended to print with as little cooling as possible for optimal layer adhesion.