CreatBot PEEK-300

The CreatBot PEEK-300 is a new industrial-grade 3D printer that focuses on high-performance materials such as PEEK and PEI. The printer is designed for high reliability and economical 3D printing of high-performance functional materials.

Features

• Large build volume of 300x300x400
• Dual extruder
• Resume print if power fails
• Pause print if filament runs out
• Prints up to 500 °C
• Heated build plate 200°C
• Heated build chamber 120°C
• Water-cooled system
• Fully enclosed chamber
• Automatic and manual bed leveling
• 4.3" touchscreen
• HEPA air filtration

The CreatBot PEEK-300 is a new industrial-grade 3D printer that fully focuses on high-performance materials such as PEEK and PEI. The printer is designed for high reliability and economical 3D printing of high-performance functional materials.

Large print space

The PEEK-300 has an impressive build space of 300x300x400 mm. Being able to print PEEK in this size is incredibly good.

Dual extruders

The PEEK-300 extruders include an intelligent cooling system. This ensures that the filament is always fed at the optimal temperature. The height-adjustable nozzles allow you to adjust them very quickly and easily. Perfect when you want to 3D print with support, varied materials, or simply two colors. All CreatBots from 3D Prima come standard with dual extruders.

Liquid cooling

The cooling system is one of the most important components in a printer, and even more so in a printer that can reach high temperatures. The PEEK-300 features a newly developed liquid cooling system that circulates water in the hot-end, keeping it at an optimal temperature.

Air pump cooling

In support of the liquid cooling system, the PEEK-300 also has an air pump cooling system. The feature that sets this printer apart from others is that it draws cool air from outside instead of simply using the warm air inside the printer.

Filament detection system

Should you run out of filament during a 3D print, don't worry. The 3D printer goes into pause mode and allows you to change the filament – then just press resume, easy!

High-temperature 3D prints

The nozzle can operate at temperatures up to 500 °C. This means you can use a wide variety of filaments, including PEEK.

Continue 3D printing

If you experience an unexpected power outage, the PEEK-300 remembers the last known position, saves it, lowers and retracts the filament. When power returns, you can continue 3D printing.

Enclosed and heated build area

The build chamber of the PEEK-300 can be heated to 120 °C. Thanks to this feature, the printer can maintain a constant temperature, meaning you run a much lower risk of cracks and warping. This is a problem often encountered with, for example, ABS on printers without a heated build chamber.

Heated build platform

The build platform on the PEEK-300 can reach up to 200 °C. This is important if you want to print materials like PEEK, PEKK, and similar materials.

Print with precision and speed

With the PEEK-300, CreatBot has taken everything a step further in terms of speed, precision, and reliability. Resolution up to 0.04 mm and a print speed of up to 120 mm/s (40-60 mm/s optimal speed). Combine this with a powerful direct-drive setup, and you have a printer that will perform its best every time you use it.

Fully enclosed build chamber

The CreatBot PEEK-300 has a completely enclosed build area, which prevents large 3D prints from cracking or warping.

Triple thermal insulation

The triple thermal insulation is made of a double insulation chamber, advanced insulation materials, and vacuum double PC sheets. It guarantees ultra-performance and safety.

HEPA air filtration

The air filtration system can adsorb impurities and gases generated when printing special filaments, which is safer and more environmentally friendly, making it more suitable for home, school, and office environments.

Technical specifications