Bambu Lab N20 Reduction Gear Motor

The N20 Reduction Gear Motor is a low-power gear motor with a D-shaped output shaft, suitable for applications requiring continuous rotation of objects. It is available in three speed variations: low speed (150 RPM), medium speed (400 RPM), and high speed (1000 RPM).

The motor can be connected to the 4-channel Power Distribution Board (PDB) using a wire pair with SH1.0-2PIN (5cm / 10cm / 20cm).

Important Considerations

• Use a power supply within the specified operating voltage range.

• Avoid immersing the motor in water or exposing it to moisture.

• Use screws of appropriate length to secure the gearbox to prevent thread damage or contact with internal gears.

• When securing the motor with glue or adhesive, ensure it does not penetrate the gearbox, shaft, or motor interior.

• Regularly apply a small amount of lubricant or grease to the gearbox to extend its lifespan and reduce noise.

Installation Guide

Connect the motor to a compatible power source within the 3V–7V operating voltage range, using the provided SH1.0-2P wire pair. Ensure correct polarity when connecting to the 4-channel Power Distribution Board (PDB).

• Secure the gearbox using screws of appropriate length.

• Avoid over-tightening to prevent damage to the gearbox housing.

• Do not allow adhesives to penetrate the gearbox or motor housing.

Compatibility

Compatible with the 4-channel Power Distribution Board (PDB) and SH1.0-2PIN wire pair (5cm / 10cm / 20cm).