Bambu Hotend - P2S & H2 Series (H2D, H2D Pro & H2S)

Quick Change Nozzle Design

The special design of the H2 series hotend heating unit allows for easy separation of the thermal and electronic components in the hotend. Simply unlock the bracket for quick and easy removal and installation of the hotend.

Note: Make sure the hot end has cooled down before replacing and avoid touching the heating block (the bottom part of the hot end) to prevent the risk of burns.

0.2 mm Nozzle – Optimal Print Fineness

• Smaller diameter pushes out thinner filament threads

• High resolution on the horizontal printing surface

0.6mm and 0.8mm Nozzle – Faster Printing Speed

• Larger diameter pushes out more filament per second, resulting in faster printing speeds

Comparison of Different Nozzle Sizes

Nozzle & Filament Compatibility:

[Note]

• Filaments with carbon fiber, fiberglass, metal, or other inorganic particles tend to clog a 0.2 mm nozzle.

• For filaments containing carbon fiber or fiberglass, it is strongly recommended to use a 0.6 mm hardened steel nozzle to minimize the risk of clogging and wear.

• Bambu PLA-CF and Bambu PETG-CF have been thoroughly tested and have been shown to have a low risk of clogging when printed with a 0.4 mm hardened steel nozzle, while achieving higher print quality.

Read more about filament compatibility on the Bambu Lab Wiki .

In the box

• Hotend with nozzle ×1

Compatibility

• H2 series

Product specifications

Specifications

• Max. print speed : 350 ℃

• Length : 49.2mm

• Packaging weight : 0.026 kg

• Packaging size : 60 × 60 × 30 mm