Anycubic Cobra S1

"The Kobra S1 is a great machine for the price. It comes without an ACE unit, which means it's just a simple color machine, you can always upgrade it by purchasing an ACE unit - 3DSaga

NOTE: The video shows several colors that require an upgrade!

The Kobra S1 can print a complete Benchy in just 15 minutes!

• Recommended print speed 300mm/s
• Max print speed 600mm/s
• Max Acceleration: 20,000mm/s2

With a quick release hotend you can easily switch between different sizes of nozzles or easily perform a repair.

The hotend can reach temperatures up to 320℃ and comes with a standard 0.4mm brass hotend. The high temperature allows you to print in everything from PLA to more complex materials like ABS or ASA.

With support from Anycubic we can offer several types of nozzles from 0.2 all the way up to 0.8mm. Which can give better resolution with a 0.2mm nozzle or print much faster with a 0.8mm nozzle

You can easily bet on your Kobra S1 Combo!

With spaghetti detection with AI camera, timing belt tension and power-loss resume, you can safely and easily set your 3D printer to print overnight without worry.

With a respectable print area of ​​250x250x250mm, the only limit is your imagination. If you need to print something larger, you can use Anycubic slicer next to make cuts and halve your models so they fit into the print area of ​​the Kobra S1 Combo.

SKIP ITEMS!

Anycubic has added a long-awaited feature, namely ship part, which means that if one of your prints fails you can cancel only the failed part and you don't have to stop your entire print. This way you can save filament, time and money!

NOTE! IT IS NOT POSSIBLE TO CHANGE THE NOZZLE IN A COBRA S1! AS IT IS GLUED IN! This is NOT covered by the warranty!