Magigoo Original 120ml

The same Magigoo 3D printer glue… just bigger.

Everything you need for secure 3D printing adhesion.
Magigoo is an easy-to-use 3D printer adhesive designed to solve the problem of the first layer not sticking properly. Magigoo ensures a strong adhesion to the hot build plate. But the magic only begins when the print is finished: simply wait for the plate to cool down, then remove your print with a flick of your finger! In addition, Magigoo helps prevent the print from warping. Isn't that magical? Whether you're a hobbyist or a professional, it's incredibly satisfying to have a 30-hour print finished without warping – and that comes off easily once it's cooled down.

• Over 100 uses
• ABS, PLA, PETG, HIPS, ASA, TPU
• Easy application
• Easy release
• Easy cleaning
• No smell
• Non-toxic
• No additional tools required
• Easy to transport
• Nicer print finish

Get this extra large version with a larger application area, making it easy to apply the glue to larger print surfaces.

Do you have problems with skewing/warping when 3D printing?

Then MAGIGOO is an easy-to-use 3D printing adhesive designed to solve the problem of the first non-adhesive layer (warping). This is the most common problem in 3D printing for manufacturing with FFF / FDM technology.

Main features

• Easy to use: Using Magigoo is a breeze. Shake, press and apply. Spread only on an active print area. It is not necessary to cover the entire surface
• Easy release: Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled.
• Easy to clean: Magigoo can be easily cleaned with water.
• Long-lasting: Magigoo lasts for 100+ average prints.
• Odorless and safe: Magigoo is safe to use - whether in a closed room or in a teaching workshop with children.

Important note: The applicator has an active spring valve that is activated when the applicator is pressed against the build plate. Do not squeeze the bottle like a "ketchup bottle" or the applicator may pop off. The bottle should only be squeezed slightly when the tip is pressed against the bottom, and this may only be necessary if a higher flow is needed. Do not squeeze the bottle when the cap is off, otherwise the glue may pop out of the bottle.